hot dip galvanized rmc conduit

EastConduit RMC is manufactured from high-strength steel coil, and produced according to the standard of ANSI C80.1(UL6). The interior surface of our conduit is free from defect with a smooth welded seam. It is hot dipped galvanized inside and outside, so that metal-to-metal contact and galvanic protection against corrosion are provided,and the furface of the conduit is coated with a clear lacquer coating to inhibit white rust and increase corrosion resistance. And the conduit is threaded on both ends, with a coupling applied to one end and a by size color coded thread protector to the other as per table. The interior surface provides a smooth continuous raceway for easy wire pulling.  Our conduits ductility characteristics provide for easy bending, cutting, and threading in the field.

1)Tade Size : from 1/2” to 6”

2)Both ends: threaded both ends with one coupling and plastic cap

3)Length: 3050mm or according to customer’s requirement

4)Usage: through the electrical wires with the purpose of protection for the electrical raceway system
5)Surface finished: Hot dip galvanized(HDG). 
6)Material : carbon steel coil

7)Package: the conduits coverd with pvc paper then tied with steel straps

8)Delivery time: 20 to 30 days after we receive your advance payment or copy of L/C

9)Payment Term: L/C at sight or T/T

Dimension and Weight Chart

Applicable tolerances:

Length: 10Ft (3.05m) ± ¼” (±6.35mm).

Outside Diameter: ½”-2” ±0.015” (±0.38mm); 2½”-4” ±0.025” (±0.64mm); 5”-6” ± 1%