Product Details

Product Description

BD850CMC diesel fuel pump test bench adopts the advanced industrial all-in-one controlling system which is digital controlled of the rpm, temperature, air pressure,

travel of the tooth bar, advanced angle, pump technical parameter and so on.

The test bench is installed with imported original frequency converter which transfers the data.

For more information, please refer to our website.

can test all the rotor and inline pump

FUNCTIONS:

1. Map and check the curve of governor(idle , part and full load ).

2. Checking of the advance device in dynamics.

3. Measurement of each cylinder's delivery at any speed.

4. Checking of each cylinder's injection timing with static.

5. Measurement of rack travel at any speed.

6. Checking of the LDA.

7. Checking of the mechanical governor.

8. Checking of the pneumatic governor.

9. Checking of the vacuum capacity of governor.

10. Measurement of the internal pressure of distributor pump body.

11. Measurement of the reflux delivery of distributor pump.

12. Testing of the electro-magnetic valve of distributor pump.

13. Checking of the transfer pump.

14. Checking of the sealing of injection pump body.

PARAMETERS:

1.Power: 5.5 /7.5/11/15/18.5/22/30KW

2. Electronical supply: 3phase,380V/50HZ (or on request)

3. Interaxe height: 125mm

4. Volume of fuel tank: 60L

5. DC. Supply: 12/24V

6. Feeding fuel pressure: low:0-0.4MPA

high:0-4MPA

7. Range of speed: (+/-)0-4000RPM

8. Control fuel temperature: 40+/-2

9.Test Cylinders: 12cyl.

10. Output air: -0.05-0.3MPA

we can made as your request.

FUNCTIONS:		CHARACTERISTIC:		PARAMETERS:
1.	Map and check the curve of governor(idle , part and full load ).	1.	Quick view the characteristic curve of governor in dynamics. Test pump with the curve of governor. Save time, save effort, rapid, audivisual, accurate. It's a very good tool for specialist to test pump.	Power	5.5 /7.5/11/15/ 18.5/22/30KW
2.	Checking of the advance device in dynamics.	2.	Computer (industrial computer work station, hand book, pc) measure and control. Standard computer and standard ports. CD-ROM drive, hard disk, Windows operating system.	Electronical supply	3phase, 380V/50HZ (or on request)
3.	Measurement of each cylinder's delivery at any speed.	3.	High definition, LCD or CRT monitor.	Interaxe height	125mm
4.	hecking of each cylinder's injection timing with static.C	4.	Four ways to adjust speed. Hand, digital, programmed 8-steps preset, slide.	Volume of fuel tank	60L
5.	Measurement of rack travel at any speed.	5.	You can set up test data of injection pump, and use it to control test bench.	DC. supply	12/24V
6.	Checking of the LDA.	6.	You can set up database of governor's curve.	Feeding fuel pressure	low:0-0.4MPA high:0-4MPA
7.	Checking of the mechanical governor.	7.	You can compare the test curve with the standard curve of governor.	Range of speed	(+/-)0-4000RPM
8.	Checking of the pneumatic governor.	8.	You can get a report of a tested pump.	Control fuel temperature	40+/-2
9.	Checking of the vacuum capacity of governor.	9.	Patent technology.	Cylinders	12cyl.
10.	Measurement of the internal pressure of distributor pump body.	10.	Two control system. Computer and instruments. You can select one of them.	Output air	-0.05-0.3MPA
11.	Measurement of the reflux delivery of distributor pump.	11.	With protect function for over and low voltage and short phase.
12.	Testing of the electro-magnetic valve of distributor pump.	12.	Save electric power. Direct drive AC motor.
13.	Checking of the transfer pump.	13.	High output torque, low fall of rotation speed. Adjusting speed quickly.
14.	Checking of the sealing of injection pump body.	14.	It can test both distributor ( VE ) and in-line pumps.

Warranty

12 months

Life-time warranty. Any problem caused by our party within one year from the date of shipment, we will provide free spare parts for the repairment. After one year, we can provide the spare parts, but the user should pay for the related cost, including cost of the spare parts, delivery cost etc.