Mining machinery Holdback stop Bearing Clutch bearings MG300 MG500 MG600 MG700 MORSE
USD $2 - $20 /Piece
Min.Order:1 Piece
Jinan Kaidong Bearing Co., Ltd.
Mining machinery Holdback stop Bearing Clutch bearings MG300 MG500 MG600 MG700 MORSE
We are Jinan KD bearing company, Which is established in 2000, specilized in manufacturing of bearings. For its sufficient STOCK and favorable PRICES , We have been providing varieties of world-class brands bearings including SKF, NSK, KOYO, etc with good offers.
We have a full range of bearings used for auto spare parts inculding: Wheel Hub bearing, Cluth bearing, Motor bearing, Steering bearing, Generator bearing and gearbox bearing.
Feature
1.MG Series Cam Clutch is used for inner race overrunning applications. MI Series Cam Clutch is used for indexing applications.
2. For attaching a pulley, a gear, or sprocket to the clutch, insert the clutch into the hub of the device, and screw the bolts (high tension) into the tapped holes on the clutch end. The tolerance bore of the hub should be H6 or H7 of JIS standard
3. Recommended shaft tolerances are as follows:
4. The key should be in accordance with JIS B1301-1959. However, for M750 and above models, a key is attached.
5. Use only a parallel key to secure the clutch. Never use a tapered key.
6. If the clutch receives shock loads or is designed for use at full torque capacity, it is better to use a
hardened key and shaft.
7. Allow for a clearance between the top of the clutch keyway and the top of the key for pressure ventilation of the clutch in the case of MG Series. A pressure ventilation hole is provided on the keyway of the clutch inner race.
8. When mounting the clutch on a shaft, apply pressure to the inner race, but never to the outer race.
9. Thrust load should be taken up by other devices, not by the Cam Clutch.
10.When using MG Series at medium and high speeds, pay attention to heating. Longevity is shortened if
the temperature of Cam Clutch outer race rises to over 70°C. In case of continuous over running
Please contact Tubaki. In this case, use a different model or provide an oil bath or forced lubrication.
11.Oil is not sealed in at the time of shipment. Supply an appropriate amount of oil before use.
12.When placing an order for MG Series Cam Clutch model MG 750 and above, please inform of the overrunning speed you use.
13.For vertical mounting, please consult .
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Dido Shi
Jinan Kaidong bearing CO.,LTD
TEL: 86-15169005277(WHATAPP/WECHAT)
SKYPE: aimee-ivy