Name: Acrel AMC96L-E4/KC three phase digital power meter
Brand: Acrel
Availability: InStock

Product Details

Technical consulting: Tina Li

Tel/Whatsapp:+86 15161626103

Email:sales02@email.acrel.cn

Data download

Product Introduction

AMC series intelligent power collection and monitoring device is a smart meter designed for power monitoring needs of power systems, industrial and mining enterprises, utilities, and intelligent buildings. It integrates measurement of power parameters (such as single-phase or three-phase current, voltage, and active power). Power, reactive power, apparent power, frequency, power factor) and power monitoring and assessment management. At the same time, it has a variety of peripheral interface functions for users to choose: with RS485 communication interface, MODBUS-RTU protocol can meet the needs of communication network management; 4-20mA analog output can correspond to measured electrical parameters, meet DCS Such interface requirements; with switch input and relay output can realize the function of "remote signal" and "remote control" of circuit breaker switch. High-brightness LED/LCD display interface, parameter setting and control through buttons, ideal for real-time power monitoring systems. Can directly replace conventional power transmitters and measuring instruments. As an intelligent, digital front-end acquisition component, the instrument has been widely used in various control systems, SCADA systems and energy management systems.

Product Functions

Meter type

Basic function

Optional function

Co-selection function

AMC72-E4/KC

AMC72L-E4/KC

Three phase voltage, Zero sequence voltage

Three phase current, Zero sequence current

Three phase active power, Total active power

Three phase reactive power, Total reactive power

Three phase apparent power, Total apparent power

Three phase Power factor, Total power factor

Frequency, Voltage phase angle, Voltage and current imbalance,Forward and reverse power

Four quadrant energy metering,System time display

1 channel RS485 interface / Modbus-RTU protocol and the statute DLT645.

①2DI+2DO+1Ep(K)

②4DI+2DO(K)

③Event record (SOE)

④Total harmonic measurement (H)

①③④

②③④

AMC96-E3/KC

AMC96L-E3/KC

①4DI+2DO+1Ep(K)

②2DI+2DO+1Ep(K)

③Event record (SOE)

④2-31th harmonic measurement (H)

⑤2-channel analog output (M)

①③④

②③④⑤

AMC96-E4/KC

AMC96L-E4/KC

AMC72-E/KC

AMC72L-E/KC

single-phase voltage，single-phase current

active power, reactive power, apparent power

Power factor

Frequency

Four quadrant energy metering,System time display

1 channel RS485 interface / Modbus-RTU protocol and the statute DLT645.

①2DI+2DO+1Ep（K）

②4DI+2DO（K）

Note:

1.DI--Switching input, DO--Switching output, M--Analog output, SOE--Event recording, H--Harmonic measurement, Ep--Electric energy pulse

2.When the digital tube is displayed, the harmonic data is not displayed, and the data is read only by communication.

3.K is a required function，Choose from ①②

4.When Event record (SOE) is selected,Extreme value and maximum demand（D）are available at the same time.

Technical Parameters

Technical parameters				Value
Input		Connection		Single phase-2-wire, 3-phase-3-wire, 3-phase-4-wire
		Frequency		45-65Hz
		Voltage		Rating: single-phase :AC 100V、400V Three-phase: AC 3×57.7V/100V(100V)、3×220V/380V(400V)、3×380V/660V(660V)(96 size only) Note：72 profile not suitable for high voltage applications
				Overload:1.2 fold rating {continuous) : 2 fold rating for 1 second
				Power consumption:<0.5VA
		Current		Rating: AC IA、5A
				Overload:1.2 fold rating(continuous);10fold rating for 1 second
				Power consumption:<0.5VA
Output		Electric energy		Output mode:open-collector photo-coupler pulse
				Pulse constant: 10000imp/kWh(settable)，see wiring diagram for details；
		Communication		RS485port, Modbus -RTU protocol,DLT645 protocol(versions 07 and 97)， baud rate 1200 ~ 38400
Function		Switching input		Dry contact input, built-in power supply;
		Switching output		Output mode: Relay normally open contact output
				Contact capacity: AC 250V/3A、 DC 30V/3A
		Analog output		0-5V,0 - 20mA,4 - 20mA
Accuracy class				Frequency:0.05Hz,Current、Voltage:0.2 class,Reactive power:l .0class,Reactive Electric energy:l .0class, active power:0.5class,active electric energy: 0.5class,2-31th harmonic measurement:±1%
Power supply				AC/DC 85-265V	power consumption≤10VA
Security	Power frequency withstand voltage			Between Power supply//Switching Output// Current Input//voltage Input and Transmitting// Communication //Pulse Output//switching input AC 2 kV 1min; Between Power supply、switching output、Current Input、voltage Input AC 2 kV 1min; Between Transmitting、Communication、Pulse Output、switching input AC 1kV 1 min;
	Insulation resistance			Input、Output end to machine enclosure >100MΩ
Environment			Temperature	work: -25°C~+65°C storage: -40°C ~+80°C
			Humidity	≤93%RH Non-condensing
			Altitude	≤2500m

Note: The instrument Modbus RTU is compatible with dlt645 and only needs to set the corresponding address. See Chapter 6.3 for details.

Dimension Drawing(Unit:mm)

Outline	faceplate size		housing size			cutout size
Outline	width	height	width	height	depth	width	height
72 square	75	75	66.5	66.5	94.3	67	67
96 square	96	96	90	90	77.8	92	92

Figure 1 AMC72 appearance size

Figure 2 AMC96 appearance size

Figure 3 AMC72 installation dimensions

Figure 4 AMC96 installation dimensions

Installation method

1)Opening in fixed distribution cabinet

2)Take out the instrument and take out the clip

3) The instrument is mounted from the Front to the mounting hole, as shown in figure 5

4) Insert the instrument clasp to secure the instrument, as shown in figure 6

Certificate

Customers

Company Profile

Acrel Co.,Ltd.[Stock Code:300286.SZ] is a professional company in china who provides various systematic solutions of power monitoring,energy management and electrical safety for smart grid users.

Since June 2003,we have always been focused on the research,production and sales of intelligent electric meters.We concentrate on providing products and services to help customers improve electricity efficiency and safety.So far we have had the following comprehensive solutions for different applications:35(10)/0.4KV substation antomation system,power quality management system for medical location,precise distribution management system,smart lighting control system,remote orepayment metering system and motor control center.

Jiangsu Acrel Electrical Manufacturing Co.,LTD,our production base in Jiangyin City,Wuxi,provides guarantee for the industrialization and large-scare implementation of products.The annual production capacity of various meters is 2 million units,and more than 1.3 million units are sold in 2018.

Since the listing in 2012,our company has maintained steady growth.The company will adhere to the concept of“innovation,efficiency,unity,integrity”，adhere to steady operation and continuous innovation,and provide more high-quality products,services and silutions for power system users and micro-grid.

Contact