Product Details

1. Introduction

Seamless titanium tube is made of titanium or titanium alloy without welding through the formation of pipe.

2. Materials & standards

Materials	Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12
Standard	Alloy titanium	Gr.1,Gr.2
	ASTM B861, ASTM B862, ASTM B337, ASTM B338 and ASTM 4942	Gr.5(Ti-6Al4V),Gr.7(Ti-0.2Pd), Gr.9(Ti-3Al2.5V),Gr.12(Ti-0.3Mo-0.8Ni)
Technique	hot rolled, cold rolled
States	Annealed (M)
Shape	Round, square, coiling
Surface	Pickling or Bright

3. Application

Titanium tube is widely used in chemical equipment, electrical equipment, desalination of sea water, salt-making equipment, ocean anti-corrosion, petroleum drilling equipment, automobile and motorcycle exhaust pipe, heat exchanger, condenser, heater distiller, reactor, separator, evaporator, etc…

4. Chemical Requirements

Grade	N	C	H	Fe	O	Al	V	Pa	Mo	Ni	Ti
GR 1	0.03	0.08	0.015	0.20	0.18	/	/	/	/	/	bal
GR 2	0.03	0.08	0.015	0.30	0.25	/	/	/	/	/	bal
GR 5	0.05	0.08	0.015	0.40	0.20	5.5~6.75	3.5~4.5	/	/	/	bal
GR 7	0.03	0.08	0.015	0.30	0.25	/	/	0.12~0.25	/	/	bal
GR 9	0.03	0.08	0.015	0.25	0.15	2.5~3.5	2.0~3.0	/	/	/	bal
GR 12	0.03	0.08	0.015	0.30	0.25	/	/	/	0.2~0.4	0.6~0.9	bal

5. Physical Properties

Grade	State	Tensile strength(min)		Yeild strength (min)		Elongation (%)
Grade	State	Ksi	MPa	ksi	MPa	Elongation (%)
GR 1	（M）Annealed	35	240	20	138	24
GR 2	（M）Annealed	50	345	40	275	20
GR 5	（M）Annealed	130	895	120	828	10
GR 7	（M）Annealed	50	345	40	275	20
GR 9	（M）Annealed	90	620	70	438	15
GR 12	（M）Annealed	70	438	50	345	18

6. Production specifications

Types

OD (Outside Diameter)

(mm)

Wall Thickness

(mm)

Length

(mm)

Thin wall Tubes

3 - 133

0.5 – 12.0

Max. 12000

Thick wall Tubes

50 - 80

1.0 – 100.0

Max. 4000

Note: Non-standard sizes are also available.

7. Delivery

We can deliver the Titanium products according to the stock status, usually 3-25 days.

8. Packing Details

Packed with wooden case, cardboard case or according to the requirements of customers