Hot Metallurgical Mounting Press/Metallographic Sample Preparation Price
USD $3,060 - $3,261 /Set
Min.Order:1 Set
Jinan Hensgrand Instrument Co., Ltd.
Metallographic Specimen Grinding and Polishing Machine/Grinder and Polishing MP-2S
Metallographic Hot Mounting Press, Metallography Specimen Preparation
Grinding and Polishing Machine for Metallographic and Materiolographic Sample Preparation
Double Disc Desktop Surface Grinder Machine/Bench Grinding Machine/Polisher Machine
Metallography Specimen Preparing Grinding Polishing Machine For Glass
Single Disc Grinding and Polishing Machine For Metallographic Specimens
Application:
Model ZXQ-5 automatic touch screen metallographic specimen mounting presses a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermo plastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of molds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Model | ZXQ-5 |
Diameter of specimen | Ø25mm, Ø30mm, Ø40mm, Ø50mm |
Cooling method | water cooling |
Max. power consumption | 1600W |
Setting range of system pressure intensity | 0-2MPa (corresponding preparing) |
Temperature setting range | 90-190℃ |
Automatic cooling temperature range | 40-90℃ |
Heat preserving time | 10-2999ms |
Net weight | 110Kg |
Power supply | single phase, 220V, 50Hz |
Dimension | 640× 460× 530 mm |