Product Details

Product Description

Precautions during use ● please use 6 bolt mounting holes for installation method. Please tighten the bolts according to the specified tightening torque (refer to the overall dimension). ● the rotation direction mht24-90 can be bidirectional. Mht150 and above are special for right rotation (when viewed from shaft end). ● it can not be used as brake (pump). ● please connect the oil drain pipe directly to the oil tank. The allowable back pressure of oil drain circuit is 0.17mpa. ● when operating under the condition of 3.5Mpa or more than 50 revolutions per minute, please confirm whether the oil discharge is greater than the following value. If it is less than the specified value, increase the back pressure on the outlet side of the hydraulic motor and increase the oil discharge before starting the operation. ● please keep the temperature difference between the hydraulic motor and the hydraulic oil within 28 ° C. When the temperature of the hydraulic motor is low and the temperature of the hydraulic oil is relatively high, please operate under the condition of no-load and low speed (below 50min-1), control the temperature difference within 28 ° C, and then carry out the normal operation. ● when running for the first time, please inject hydraulic oil from each port and fill the hydraulic motor with hydraulic oil before starting to run.

Characteristic

This type is hydraulic balanced vane motor, with a wide range of speed and torque. ● small volume and large output torque. ● at a low speed of 10 revolutions per minute, it can also rotate stably. ● no gearbox and other reduction mechanism is required, which can realize miniaturization of design.

Technical Parameters

Model	displacement	Maximum service pressure Mpa	Theoretical torque (differential pressure 0.7MPa) N.m	Rotational speed min			Weight kg
Model		Maximum service pressure Mpa	Theoretical torque (differential pressure 0.7MPa) N.m	cm3/rew			Weight kg	minimum	Highest
MHT24	298	14	33	10	400	55
MHT32	398				44		400	55
MHT50	620				69		350	95
MHT70	868				97		300	110
MHT90	1116				124		300	110
MHT150	1860				207		250	165
MHT190	2360				263		200	240
MHT250	3100				346		200	240
MHT380	4720				526		200	335
MHT500	6200				691		200	335
MHT750	9300				1036		100	420
MHT1000	12400				1381		75	505

Recommend Products

Packing & Delivery

In order to ensure that the product is not damaged during transportation, we will choose to use high-hardness cardboard boxes or wooden boxes to package the product according to the volume of the product, and adopt protective measures such as foamanti-collision and wooden frame fixing to ensure the safe and non-destructive delivery of the goods to the greatest extent.

Company Introduction

Service providers in the industrial sector

Contacts: Marie Cheung

Telephone: +8613729884993 (Wechat Synchronization)

E-mail: marketing@szouhang.com

Zip:518125
Address:Buildings 32,Third industrial zone, houting,Shajing,Bao'an District,

Shenzhen, China (Mainland)

Contact Supplier