This valve is used to remove air mass and microbubbles in the circulation system.

1. Pressure drop is very low and will not cause the hydraulic imbalance to the system；
2. Reduce the system commissioning time after initial flooding；
3. Install in flexible locations, not at the top；
4. Removal of residual air is remarkable.

The valve adopts a unique spiral-type filter to collect air mass and micro air bubbles in the medium through the spiral groove of the filter core. Large air bubbles rise to the gas collecting chamber in the upper part of the separator. When the system is in normal operation, they are discharged through the air release valve at the top. 

The valve adopts a unique spiral-type filter to collect air mass and micro air bubbles in the medium through the spiral groove of the filter core. Large air bubbles rise to the gas collecting chamber in the upper part of the separator. When the system is in normal operation, they are discharged through the air release valve at the top. 

This valve needs to be installed horizontally on the pipeline. It is recommended to be installed at the higher temperature or lower pressure in the system. Leave enough room for operation and maintenance around the upper and lower areas. For specific use, please consult ZECO Valve Group.

Size Range: 2"~40"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2

ZECO is a professional china control valve supplier, we provide check valve, gate valve, butterfly valve, control valve, water valve and etc. Want to know more, please contact us.