Barb wire fence， Barbed wire cage， Galvanized Barbed Wire After replacing the barbed wire roller cage and the protective fence with barbed wire, the installation distance behind each cross opening is 20cm, and the diameter is not less than 45cm. The bracket is placed on the fence, the middle span spans 3 meters, and the barbed wire mesh is galvanized with galvanized steel or Q235 carbon steel. Use the three support rings on the cover, the center column support ring and the encryption support ring to galvanize the surface treatment. The installation method of the razor wire cage is also suitable for factories, schools, airports, railways and other places. It can be adjusted according to different terrain.
Barb wire fence， Barbed wire cage， Galvanized Barbed Wire The installation method is widely used in high-end residential areas, important warehouses, factories, border military sites and other places that need to be sealed off. After opening, the installation distance of each cross circle is 20 cm, and the diameter is not less than 45 cm. Lay flat with the column, buried in the ground no less than 0.3m, and the barbed wire cage is made of 0.5mm thick Q195 steel plate. The bracket is placed on the fence, the middle span is 3 meters, and the other span is only placed on the top of the fence.
Barb wire fence， Barbed wire cage， Galvanized Barbed Wire The installation distance is 20 cm, and the ring diameter is not less than 45 cm. The height of the two brackets is generally 730mm, and there are two hooks on the upper side. The encryption bracket weighs about 1.73 kg and has a thickness of 2 mm. The span of the barbed wire cage is only placed on the upper part of the column. The protective fence and barbed wire rolling cage are hot-dip galvanized. The amount of zinc plating is usually 120g/m. The 8mm diameter clamp shape is specially designed nut and anti-theft washer. The peripheral processing should be beautiful and have good practical value.
Barb wire fence， Barbed wire cage， Galvanized Barbed Wire The blade is made of 180 mm wide acute-angle galvanized steel or stainless steel plate, opposite to the column. It is a protective fence with metal mesh. After opening, each cross circle is installed at 20 cm intervals. For this reason, the factory purchased extra-thick gloves to prevent workers from being stabbed. The main components of the bayonet cage produced by our factory are: bayonet rope (composed of sharp blades and high-strength core wire), vertical suspension wire, column support, encryption support and support hoop. The surface treatment includes three support rings, middle column support ring and encrypted support ring.