1     Scope

1.1   This standard specifies requirements for thermoplastic-insulated wires and cables covering copper conductor of 2.0 mm² up to 500 mm² rated 600 volts for use in accordance with the Philippine Electrical Code, Part 1.

1.2   The following are not covered by this standard:

a)   Polyvinyl Chloride (PVC) insulated flexible cords and fixture wires;

b)   Wires and cables  employing conductor  less than  2 mm²  and  larger than 500 mm² in cross-sectional area; and

c) Wires and cables for use at potentials more than 600 volts.

2     References

The titles of the standards publications referred to in this standard are listed on the inside back cover.

3     Definitions

For the purpose of this standard, the following definitions shall apply:

3.1

cable

a stranded conductor with or without insulation and other coverings  

3.2  

type TW insulation 

a moisture-resistant thermoplastic (PVC) insulation suitable for the type of service where conductor temperature does not exceed 60°C in dry or wet location

3.3  

type THW insulation  

a heat-and moisture-resistant thermoplastic (PVC) insulation suitable for the type of service where the conductor temperature does not exceed 75°C in dry or wet location   

3.4  

type THWN insulation  

a heat-and moisture-resistant thermoplastic (PVC) insulation with nylon jacket suitable for the type of service where the conductor temperature does not exceed 75°C in dry and wet location   

 Within 15 Working days

 1)Quality first, customer first, safety first

1.what is our payment term ?

Our payment term is usually T/T 30% in advanced, the balance before picking up the goods or L/C at sight.

2.what is the lead time ?

The lead time usually is 10 - 30 working days.

3.what is the package of the cable ?

The package is usually wooden drum or steel wooden drum or coil.also according to customer’s requirment.

4.Could we provide the free sample for customer ?

Sure, we provide the free sample for customer to checking.