Product Details

Product Description

factory price electric push pull cable steering armoured&nbsp 0.6/1kV power cable

Detail Description or Construction:

Conductor: Compressed or Compacted copper conductor class B

Insulation: Polyethylene (PE) 75°C

Jacket: Extruded black sunlight resistant, selfextinguishing, oils resistant PVC jacket with excellent mechanical properties Packaging: Non-returnable wooden drums

Options:

• CT USE applications

• Lineal low density Polyethylene jacket

• (LLDPE) jacket

Specification:

1)rated voltage: 0.6/1KV
2) Standard: IEC,BS,ASTM, VDE ,COVENIN 541
3)Cu or Al conductor, XLPE insulated electical cable

4)TTU 75 meets or exceeds the requirements of ICEA S-95-658 and COVENIN 541.

Applications

(1) Rated voltage is 0.6/1 KV

(2) Maximum rated temperature of cable conductor is 90°C,Normal 75℃.

(3) Maximum conductor temperature is lower than 250°C ,normal 105℃,when cable is shorted for less than 5 seconds.

(4) Ambient temperature is not lower than 0°C and its minimum bending radius is as follows when cable is installed

Primary power and distribution circuits in industrial, commercial and power circuit generating plants. Single conductors cables, 1/0 AWG and larger, can be marked for CT Use to be installed in ladder cable tray, according NEC Article 318.

Installation:

TTU 75 cables may be installed in wet or dry locations at maximum operating temperature of 75°C for normal operation; 90°C for emergency and 150°C for short circuit conditions. Cables may be installed indoor and outdoor, exposed to sunlight, in raceway, conduit, duct or aerially supported by a messenger and directly buried according NEC 250-51.

FAQ

Our Services

Packaging & Shipping

0.6/1kV low voltage copper conductor XLPE insulate 250MCM TTU Cable.

1.Packing length:100 to 1,000m reeled in carton drum or according to customers' requirement
2.By standard wooden drum or roll.
3.Drum size:1100mm*1100mm*1100mm or as your request .