Acrel 300286 ADW200 DIN-Rail multi circuit energy meter
USD $135 - $135 /Set
Min.Order:1 Set
Jiangsu Acrel Electrical Manufacturing CO.,LTD
wireless lcd display Acrel 3P3W 3P4W ADW210-D10-2s multi circuit power meter 2 G 4G LORA NB
wireless multi circuit energy meter modbus rtu pulse output 3P3W 3P4W ADW210-D10-4s
Acrel ADW210-D10-3S 3P3W modbus pulse output lcd display 3 channel/multi circuit power meter
ADW210-D10-1s 3P3W 3P4W lcd display din rail wireless multi circuit energy meter with modbus 2DI 2DO
Typical application
Multi-loop power meter, which can measure the grid parameters of 4 three-phase or 12 single-phase loops, including voltage, current, power, frequency, energy, demand, extreme value,total harmonic distortion rate,2-31 harmonic parameters such as wave,voltage and current imbalance,and multi-rate energy metering. The function module can be externally extended.
Connection diagram voltage inputs
Three-phase 4-wire system
The ADW can be used in three-phase 4-wire systems.
Secondary voltage
Three-phase 3-wire system
The ADW can be used in three-phase 3-wire systems.
Secondary voltage
Dimension diagram
Dimensions in mm
Installation method
Rail mounting , vertical mounting and piercing clip mounting.
Ordering information
Type | Transformer | Current loop | Expansion module |
ADW200 | 5A/1.25mA 100A/40mA | 1S,2S,3S,4S | Switch module,Temperature measurement module,Leakage module,Communication module |
ADW210 | |||
ADW220 |
Common errors check and solve
1 The meter do not light after powered, or one path of voltage indicator do not light.
Suggestion: Please turn the screw to ensure that the meter needle has been punctured and contacted with the cable inner
conductor cable.
2 Meter’s wireless communication failure
Suggestion: Please connect RS485 interface on the meter and USB convert to 485 serial port to read the parameters, and
confirm whether the parameters are the same as the upper terminal wireless configuration (channel and spread spectrum
factor). If different, please modify the meter’s wireless parameters and retest the master terminal after the same, and if
the same, it may be the meter and master terminal are in a relative long distance. It is too far to communicate or the scene
is seriously disturbed. We can try to use the external antenna at the same time, or consider the newly added wireless
master terminals, and then test it.