2-150 Microns Powder Milling Systems Fluidized Bed Opposed Jet Mill for Sale
USD $10000 - $90000 /Set
Min.Order:1 Set
Shandong ALPA Powder Technology Co., Ltd.
2-150 Microns Powder Milling Systems Fluidized Bed Opposed Jet Mill for Sale
widely used in chemical, mineral, metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials and other industries.
Jet Mill Features:
Available particle size D50:2-45μm |
Vertically classifier rotor with maximum line speed of 70m/s; |
Speed of wheel is controlled by converter, particle size can be adjusted freely; |
The jet mill is suitable for dry grinding of various materials with Moh’s hardness below 9, especially for the materials with high hardness, high purity and high added value; |
The world’s leading high-precision classifier rotor with line speeds up to 80m/s, ensuring high precision for product requirements; |
Grinding is in closed system, low dust and noise, clean and environmentally friendly production process; |
PLC control system, easy operation; |
Can be used in series with multi-stage classifiers to produce products with multiple sizes at one time; |
Jet Mill Working Principle:
Jet Mill works with cyclone separator, dust collector and suction fan to form a complete grinding system. Compressed air flow after filtration and drying would go into milling chamber from nozzles, and meet in the center area, where material would be impacted and ground and sheared.Milled powder would go up to the classifying chamber by the air flow from suction fan. The high-speed rotation of classifier wheel would create a strong centrifugal force to separate coarse powder and fine powder.Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would fall down to the milling chamber to be milled again.
Technical Parameters
Parameters/specifications | MQL03 | MQL06 | MQL10 | MQL20 | MQL40 | MQL60 | MQL80 | MQL120 |
Feed Size (mm) | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 |
Product Size (d97:um) | 8~150 | 8~150 | 8~150 | 8~150 | 10~150 | 10~150 | 10~150 | 10~150 |
Production Capacity (kg/h) | 5~100 | 10~200 | 20~400 | 50~800 | 150~1500 | 300~2000 | 400~6000 | 600~10000 |
Air consumption (m3/min) | 3 | 6 | 10 | 20 | 40 | 60 | 80 | 120 |
Air Pressure (Mpa) | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 | 0.7~0.85 |
Installed Power (kw) | 26~37 | 46~68 | 68~106 | 145~184 | 276~310 | 402~427 | 520~600 | 720~900 |
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.
More than 3,000 customers have chosen us
Q: What service do you supply?