Product Details

W-25 & W-12P live Sound Stage Speaker Equipment 5 Inch Line Array System

DESCRIPTION and APPLICATION

W-25 is a line array system which is made of two 5"woofers, a 1.4"titanium compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-25 will integrate seamlessly with W-102P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is veryversatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.

W-102P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-102P features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-102P and W-25. The physical dimensions of W-102P are identical to the W-25 and it's equipped with the same proprietary rigging system. It's features with two 10"inch woofers with magnet structure and suspensions engineered for maximum linear excursion.

Model	W-25 & W-12P
Type	Line array system
Type	Line array sub-bass system(W-102P)
Frequency Response	90Hz-20KHz±3dB
Frequency Response	45Hz-150Hz±3dB(W-102P)
Power handing	LF 160W(RMS)320W(PEAK)
	HF 60W(RMS)120W(PEAK)
	400W(RMS)800W(PEAK)(W-102P)
Sensitivity	LF 92dB( 1W@1M )
	HF 108dB(1W@1M)
	103dB( 1W@1M)(W-102P )
Max@S.P.L	LF 114dB(PEAK/1M)
	HF 126dB(PEAK/1M)
	129dB(PEAK/1M)(W-102P)
LF section	2×5"(135mm) woofer
LF section	35mm(1.5in)coil
Components	2×10"(260mm)woofers
Components	50mm(2in)coil(W-102P)
Nominal impedance	16 ohm
Nominal impedance	4 ohm(W-102P)
HF section	1×1.4"compression driver
HF section	with 34mm titanium diaphragm
Nominal impedance	16 ohm
Output section	2-channel
Dispersion pattern	110°H×9°V
Finish	Black paint
Array design	Arrays of less than 3×W-25 will
	provide poor dispersion control and
	are neither recommended nor supported
Speaker cables	1(+)1(-)Built in crossover
Speaker cables
Rigging system	Please refer to the W-25 user
Rigging system	manual before any operation
Input connectors	2×NL4MP speakon
Recommend crossover	80Hz-20KHz

	42Hz-120Hz(W-102P)
Dimensions	410×163×248mm(W×H×D)
Dimensions	408×300×493mm(W×H×D)(W-102P)
Package dimensions	480×230×320mm/0.04cbm
Package dimensions	480×370×560mm/0.1cbm(W-102P)
Enclosure	PU(W-25)/Plywood(W-102P)
Net weight	7.8kg(W-25) / 23kg (W-102P)
Gross weight	9kg(W-25) / 25kg (W-102P)

FACTORY PICTURES: