Punching machine (16 tons) with mould (3 cavities) & accessories, for 32mm aluminum cap

1.1 Components of the Machine

a. 25 tons power press, 380V (compatible with 440V);

b. Mould with 4 cavities for 28*18mm PP cap, made as per customer’s cap drawing and samples;

c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires.

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing, one mechanical air generator for ring blowing, air outlets and connection tubes;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;

j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;

1.2 Capacity: 20000-24000 caps per hour (frequency: 80-100 times/min); The design working speed is 115 times/min, while the speed 85-95 times/min is the most stable condition;

1.3 Aluminium coil width: according to cap dimension;

1.4 Spare parts (no addition cost): 50% parts of the 4 cavities.

1.5 Tools: Standard tools for repair and maintenance of the machine & mould.

1.6 Installation dimension: 2500*1700*1900mm;

1.7 Installation Notes: Only one wire with 380V &  3 Phase is needed for the machine; No need to fix the machine to the ground.

1.8 Punching Oil required: 10# industrial white oil.

Contact:Gary

Whatsapp/wechat/mobile phone:8618754342373

Skype:gary.dong5

E-mail:garydong@taialu.com