Name: Dual Band 2.4G&5G FTTH 4GE+4WIFI+1POTS+1USB 5dBi 4 Antennas AC XPON GPON ONU For ZTE Huawei
Brand: OEM/ODM
Availability: InStock

Product Details

Dual Band 2.4G&5G FTTH 4GE+4WIFI+1POTS+1USB 5dBi 4 Antennas AC XPON GPON ONU For ZTE Huawei

Product Description

1. Overview

* HUR4001XR is designed as HGU (Home Gateway Unit) in different FTTH solutions.The carrier-class FTTH application provides data and video service access .
* HUR4001XR is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
* HUR4001XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to
 meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
    
 2. Functional Feature
 * Support EPON/GPON mode and switch mode automatically 
 * Support Route mode for PPPoE/DHCP/Static IP and Bridge mode 
 * Support IPv4 and IPv6 
 * Support 4G&5.8G WIFI and Multiple SSID 
 * Support SIP Proctol for Voip Service
 * Support LAN IP and DHCP Server configuration
 * Support Port Mapping and Loop-Detect
 * Support Firewall function and ACL function
 * Support IGMP Snooping/Proxy multicast feature 
 * Support TR069 remote configuration and maintenance

* Specialized design for system breakdown prevention to maintain stable system

3. Hardware Specification
Technical item	Details
PON Interface	1 GPON BoB（Class B+/Class C+）
	Receiving sensitivity: ≤-27dBm/≤-29dBm
	Transmitting optical power: +0.5~+5dBm/+2~+7dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/UPC Connector
Design Scheme	RTL9607C+RTL8192FR(2.4G)+RTL8812ER(5G)+Si32192 BOB(RTL8290B)
Chip Spec	CPU 950MHz,DDR2 128MB
Flash	SPI NAND Flash 128MB
LAN Interface	4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless	Compliant with IEEE802.11b/g/n,ac
	2.4G Operating frequency:2.400-2.4835GHz
	5.8G Operating frequency:5.150-5.825GHz
	2.4G 2*2 MIMO, rate up to 300Mbps
	5.8G 2*2 MIMO ,rate up to 867Mbps
	4 external antennas 5dBi
	Support Multiple SSID
POTS interface	FXS, RJ11 connector
	Support: G.711/G.723/G.726/G.729 codec
	Support: T.30/T.38/G.711 Fax mode, DTMF Relay
	Line testing according to GR-909
USB	Standard USB2.0
LED	9 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G
Push-Button	2 ,For Function of Reset and WPS
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	248mm×158mm×192mm（L×W×H）
Net Weight	0.3Kg
Storing Condition	Temperature: -30℃~+60℃

4. Panel lights Introduction
Pilot Lamp	Status	Description
PWR	On	The device is powered up.
	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
2.4G	On	2.4G WIFI interface up
	Blink	2.4G WIFI is sending or/and receiving data (ACT).
	Off	2.4G WIFI interface down
5.8G	On	5G WIFI interface up
	Blink	5G WIFI is sending or/and receiving data (ACT).
	Off	5G WIFI interface down

5.Application
* Typical Solution：FTTH(Fiber To The Home)
* Typical Business：INTERNET、IPTV、WIFI 、VOIP etc