How to catch drips under automatic soap dispenser

his white Plastic Drip Tray is designed to fit below a soap dispenser or hand sanitiser to catch any drips and keep an area clean.

How to fill a delta faucet automatic soap dispenser

The reservoir is permanently mounted to the bottom. After all, it would be rather inconvenient to have to get underneath behind the sink just to refill the soap! So you just pull the entire mechanism off the top and put the soap in there.

Specification:

1) Automatic on/off: Soap dispenser automatically supplies foam soap as the dispense-time set as soon as hands in sensor range. Soap dispenser automatically stops working if hands out of sensor range..

2) Adjustable sensor range and soap volume by a remote controller (optional).

3) Low power indication: Soap dispenser sensor flash to indicate that it is time to replace existing batteries with new ones if there is not enough power going to the unit. No soap dispensed at this time if hands in the sensor range.

4) Four D-type alkaline batteries shall last approximately 3000 times/month for 6 months.

5) It is suggested cleaning the soap hoses with clean tap water if you will not use the soap dispenser for more than 1 week. How to clean: please pour clean tap water into the soap bottle and sense the soap dispenser until the tap water dispensed.

Products Features:

●Humanized appearance design, convenient installation design and simple liquid adding design.
●Adaptive or adjustable sensing technology.
●Exclusive development of soap pump technology, can automatically stop reflux.
●Optional AC/DC power supply.
●1000 ml liquid storage bottle.
●Suitable for soap solution viscosity: 100-3800cPs.
●Including necessary installation hardware.
●Meets ASME A112.18.1/CSA B125.1 standard.

●Meets US ADA regulations and CJ/T 194-2004 standards.

Description:

1 it can match and use together with all kinds of faucets perfectly.

2.It adopts the infrared ray emission and reception technology, which is completely touch-free so that it is convenient and safety.

3.The spout is made of brass plated with chrome and its plating is enhanced, so that the product can maintain a long term fresh color and become more durable.

4.Time-adjustable and amount-adjustable, the users can adjust the dispensing time and foam amount, and it can be used in various

How to clean zlof automatic soap dispenser

Turn the unit off.

Open the lid, and empty the tank.

Rinse the tank with water, and empty.

Remove and clean the nozzle. ...

Turn the unit on.

Trigger the sensor repeatedly to dispense any remaining soap in the line.

Add approximately one ounce of water to the tank to rinse any remaining particles.