Description of Corn Chips Seasoner Machine
The seasoning machine is used to season the food in the food production process. This equipment has an inclined seasoning drum, which automatically controls the speed and material capacity, and is suitable for continuous seasoning operations in the assembly line.
Equipped with a screw powder feeding device, and can stir autonomously while sprinkling the powder, so that the seasoning will not be deposited, bonded, and emptied due to different specific gravity and return of halogen. Equipped with mixing powder, uniform and accurate quantitative. This product integrates electromagnetic, light control, electric control, and digital delay in one, with a high degree of automation.
Parameters
Model | Diameter of Roller(KW) | Length of Roller(KW) | Powdering Power(KW) | Rotating Power(KW) | Size(MM) |
GGGT1500A | 600 | 1800 | 0.18 | 1.5 | 2100*770*2100 |
GGGT2400A | 600 | 2400 | 0.18 | 1.5 | 2700*770*2100 |
Features of Drum Corn Chips Seasoning Machine
1. The roller is bent to form a scraper shape to ensure minimal welds, sanitary and easy to clean.
2. The residence time of materials can be adjusted according to the footing.
3. The tail is closed to increase the mixing time.
4. The outside is stainless steel hoop, and the roller uses hard plastic roller, which is wear-resistant and low noise.
5. The scraper formed by the internal bending increases the uniformity of the mixing of breakfast cereals in the drum.
Working Principle:
When the material falls into the drum, it is driven by the stirring blade to move upwards, falls from above, and mixes with the seasoning powder. During the working process, there is always seasoning in the dusting box. If the seasoning is found to be insufficient, add it in time
Stainless Steel Corn Chips Seasoning Machine Steps
(1) Connect the equipment to the power supply, the drum motor is 380v, and the dusting motor is 220v.
(2) Start the drum motor, and the drum will slowly start to the normal speed. Start the dusting motor, and the dusting device starts to work.
(3) The raw materials that need to be stirred for seasoning are continuously fed into the seasoning machine with a conveyor or manually from the inlet end.
(4) Turn on the powder-spreading motor to spray the seasonings evenly in the drum.
(5) Check all operating parts and work after confirming normal operation.
(6) If the speed is too high, you can turn the knob of the inverter to the left, and the speed can be slowed down, not lower than 70% of the speed.
(7) If the material moves forward in the drum too fast, the inclination of the drum can be reduced, and too slow can increase the inclination of the drum.