Product Details

Products Specifications

150mm plastic cube mould

Standards: JG237-2008

The 150mm plastic cube mould is used to make specimen for concrete compressive test.

Technical specifications

Internal Size: 150×150×150mm

Working temperature: -35-100 degree C

Internal surface Roughness: Ra<3.2um

Internal size accuracy: 150±0.3mm

Angle accuracy: <0.2degree

Flatness: <0.04mm per 100mm

Adjacent plane verticality: <0.5mm per 100mm

Structure: unibody

Material: Engineering plastic with heat expansion coefficient <50*10-6/℃

Advantages of plastic moulds

Much lighter in weight compared to the iron mould, lower the working strength, lower in transportation cost

No need mould install and mould removal because it’s a whole, can use air pump to demould, higher in work efficiency

Higher in size accuracy

No temperature deformation within -30~+100 degree C.

Test Moulds specifications (plastic & iron)

Mould	Form type	L(mm)	W(mm)	D(mm)
Cement mortar mould	3-gang	160±0.8	39.98±0.08	40.05±0.05
Cement mortar abrasive mould	Single gang	150±0.05	150±0.05	30±0.05
Mortar mould	3-gang	70.7±0.05	70.7±0.05	70.7±0.05
Concrete compression mould	Single	100±0.2	100±0.2	100±0.2
	Single	150±0.3	150±0.3	150±0.3
	Single	200±0.4	200±0.4	200±0.4
Concrete bending test mould	Single	400±0.8	100±0.2	100±0.2
	Single	550±1.0	150±0.3	150±0.3
	Single	600±1.0	150±0.3	150±0.3
Concrete split tension mould	Single	100±0.2	100±0.2	100±0.2
Concrete split tension mould	Single	150±0.3	150±0.3	150±0.3
Concrete axial compression mould	Single	300±0.6	100±0.2	100±0.2
	Single	300±0.6	150±0.3	150±0.3
	Single	300±0.6	200±0.4	200±0.4
Concrete axial tension mould	Single	550±1.0	100±0.2	100±0.2
Concrete compression & elastic modulus mould	Single	300±0.6	100±0.2	100±0.2
	Single	300±0.6	150±0.3	150±0.3
	Single	300±0.6	200±0.4	200±0.4
Concrete bending elastic modulus mould	Single	550±1.0	150±0.3	150±0.3
Concrete abrasive mould	Single	150±0.3	150±0.3	150±0.3

Mould	Internal surface flatness(per 100mm)	Two adjacent plane verticality (per 100mm)	Two opposite plane parallelism (per 100mm)
Cement mortar mould	0.03	0.20	--
Cement mortar abrasive mould	0.03	--	0.02
Cement mortar mould	0.04	0.50	0.05
Concrete compression, concrete axial compression mould, concrete compression elastic modulus mould	0.04	0.50	--
Concrete bending test mould, concrete bending elastic modulus mould	--	0.50

Hot Tags: 150mm plastic cube mould, manufacturers, suppliers, factory, price, buy, for sale