Products Specifications
Low strain pile integrity tester
Model: PIT-8100
Description
This type pile integrity tester detects the pile defects degree and location by low strain method, it can detect the cast-in-place pile and driven pile, also it can detect structural body (e.g pier) etc. It's equipped with GPS, 4G internal storage, IP65 protection degree.
Technical specifications
Term | Spec. | Term | Spec. | |
Main control unit | Embedded platform | Continuous working time | >5h | |
Display | 5.7 inch TFT LCD | Channel number | 2 | |
Internal Storage | 4GB | Two channel Phase uniformity | ≤±1° or ≤0.01ms | |
Operation mode | Key-press+ touch screen | Two channel amplitude uniformity | ≤1% or ≤0.2dB | |
A/D conversion accuracy | 24-bit | Channel harass | ≤0.1% | |
Time resolution | 1µs | Sensor sensitivity (acceleration type) | ≥100 mV/g | |
Fixed point Amplification | 1x/2x/5x/10x/20x/50x/100x | Sensor frequency range( acceleration type) | 0.5 Hz ~9000 Hz | |
Sampling period | 1µs~64ms adjustable | Transmission interface | USB | |
Max sampling length | 4096 | Positioning system | GPS | |
Input resistance | ≥200K | WIFI | Yes | |
Dynamic range | ≥184 dB | Power supply mode | AC | 220V±10% |
Amplifier band | 10Hz～10kHz | DC | Internal Lithium battery(9V) | |
Max storage length | 4096 | Net weight | 1.3kg | |
Amplitude non-linearity | ≤10% | Main machine size | 210mm ×149mm×60mm | |
Time indication error | ≤0.1% | Working ambient | Temperature | -10℃~+50℃ |
Humidity | <90%RH | |||
Gain error | ≤1 dB | Protection degree | IP 65 | |
Standard Configuration
Main machine, ICP acceleration sensor, hammer, carrying case