Fire Testing to Electrical Products
CNY 8000 - 10000 /Piece
Min.Order:1 Piece
Plastic or rubber materials are often used in electronic and electrical products, which are flammable and have potential fire hazards. Therefore, fire safety requirements for the electronic and electrical industry can not be underestimated.
UL 94: Test for Flammability of Plastic Materials for Parts in Devices and Appliances
HB Horizontal Burning;
V-0,V-1,V-2 Vertical Burning;
5VA, 5VB Vertical Burning;
VTM-0,VTM-1,VTM-2;
HF1-HF2;
ISO 4589-2 Plastics-Determination of burning behaviour by oxygen index –Part 2: Ambient-temperature test
ISO 4589-2 specifies methods for determining the minimum concentration of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index values.
Fire Testing to Electrical and Electronic Product:
IEC Standard:
IEC 60695-2-11: Glowing/hot wire based test methods-Glow-wire flammability test method for end-products.
IEC 60695-2-12 (GB 5169.12) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials
IEC 60695-2-13 (GB 5169.13) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for meterials
IEC 60695-11-10: Fire hazard testing-Part11-10: Test flames – 50W horizontal and vertical flame test methods.
IEC 60695-11-5:Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance
Chinese Standards:
GB/T 2406.2 Plastics – Determination of burning behaviour by oxygen index – Part2: Ambient-temperature test
GB/T 8924 Test method for flammability characteristics of fiber reinforced plastic-Oxygen index method
GB/T 5169.5:Fire hazard testing for electric and electronic products – Part 5: Test flames – Needle test method – Apparatus, confirmatory arrangement and guidance
American Standards:
ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration
to Support Candle-Like Combustion of Plastics (Oxygen Index)
ISO Standards:
ISO 4589-3 Plastics — Determination of burning behaviour by oxygen index – Part 3: Elevated-temperature test
French Standards:
NF X 10-100: Firebehaviour tests –Analysis of pyrolysis and combustion gases-Pipe still method
NF X 10-702: Fire test methods-Smoke emission-Test of measurement of specific optical density of smoke by the combustion or the pyrolysis of solid materials
British Standards:
BS 2782-0:2011 Method 508A / BS 2782-0:2011: Methods of Testing plastic – Method 508A: Rate of burning, laboratory method
For details, please consult:CASfire Technical Co.,Ltd
Tel:0592-3500085
MP:18906059211
Email:info@CASfire.cn
Website:http://www.casfire.cn
QQ:2586364329
From:IW2020