1.Product Description
Fuel Injector Jumper Wiring Harness For 6.0L F ord 03-07 Powerstroke Diesel FICM

Product Description
Fuel Injector Jumper Wiring Harness For 6.0L Ford 03-07 Powerstroke Diesel FICM

Specification:
This is FITS ALL FORD 6.0L POWERSTROKE DIESEL ENGINES
DESIGNED FOR 05-07 TRUCKS BUT WILL FIT 03-04 TRUCKS ALSO.
THIS HARNESS IS DIFFERENT BUT IT WILL WORK ON 03-04 MODEL TRUCKS.

Note of Repair:
The wiring harness holds the wires of the fuel injector. Though wiring harnesses are high-quality components that take a long time to wear out, they'll get damaged eventually. When that happens, you have to be ready to replace the wiring harness of your vehicle right away. If you're driving a vehicle that's equipped with a Duramax LLY injector, here are the things that you can do to replace the damaged wiring harness.

Related Repair Advice:
Park your vehicle, and turn off its engine.
Open the hood, and locate the fuse box in the passenger's area.
In order to relieve the pressure in the fuel system, carefully remove the fuel pump fuse.
Carefully disconnect the negative cable from the battery.
Find your vehicle's fuel injectors. Usually, these components can be found in a spot where the engine block is connected to the fuel line. Depending on the engine size, your vehicle might have several fuel injectors.
Find the old wiring harness. Check for rust, cracks and dirt. If the wiring harness isn't able to hold all the wires properly, then replace it with a new one.
Push the center of wiring harness to release it from the fuel injector. Make sure that you slide the old wiring harness down the fuel line
Depress the clip that slides over the old wiring harness so you can release it from the fuel line.
Put the new wiring harness in place by sliding it onto the fuel line just beneath the clip. You should be able to hear a clicking sound once the new wiring harness is secured.
Make sure that the fuel line and the wiring harness is aligned with the corresponding fuel injector.
Secure the new wiring harness by pressing the clip that will hold it on the fuel injector.
Reinstall the fuel pump fuse box and reconnect the negative cable to the battery

2.Compatible 

 

3.Packing&Shipping

Standard Carton packing, PP bag - Box packing-skin packing-Blister packing-Neutral packing...etc,
Or as customer`s special request.

Standard Carton packing, PP bag - Box packing-skin packing-Blister packing-Neutral packing...etc,
Or as customer`s special request.

Air Shipping(DHL FEDEX UPS EMS) will be take 5-7 work days.
If it is our stock parts, we can ship out winthin 24 hours after we received the payment.
If it is customized goods ,then we need about 7-10 work days to prepare and produce.
Normally ,It will take 15-20 work days and shipped  Pallet & Container by Sea .
When you need a large quantity for each item, we usullaly need ship by sea to save your shipping cost .usually,we use pallet LCL,and container FCL.

5.Warranty:

Please check the quality and quantity of goods when you received the goods ,Make sure what you have got is good.
 If you have any questions,please contact us at the first time.we will do our best to help you .
 We will offer you professional explanation since your satisfication is our main priority .
 Limited Time:3 Weeks

6.Our Service

We have fouced on Auto Parts and ATV Parts for many years ,we have earned a lot of Auto parts knowledge, information and good supplier ,and our parts can be fit with for atvs,dirt bike, scooter go kart, UTV and motorcycle.

In addition to that,we also have a Hunting team who can help you to finding auto parts, offer you a wanderful one-stop shopping experience .