INDUSTRIAL DUST COLLECTOR, buy PPC type High efficiency pulse jet bag filter industrial dust collector industrial dust collecting system on China Suppliers Mobile

Product Details

PPC type High efficiency pulse jet bag filter industrial dust collector industrial dust collecting system Bag Dust Collector manufacturer

Bag Dust Collector is a dry industrial filtering device. It is suitable for capturing tiny, dry, non-fibrous dust. The filter bag is made of textile filter cloth or non-woven felt, and the dusty gas can be filtered by the filtering effect of the fiber fabric to achieve the treatment effect of flue gas.

pulse jet bag filter Description

Baghouse bag filter industrial dust collector

Bag filter dust collector is widely used in cement, mineral processing, electronics, chemicals, food processing, metallurgy, casting, carbon materials, machining, timber building materials and other industries.

Working principle of industrial dust collector: Dust gas enters the middle and lower enclosures through the air inlet of the precipitator. The

dust and gas are separated through the filter of the filter bag. Dust is adsorbed on the surface of the filter bag, and clean air is discharged from the air outlet through the filter bag. Increasing the amount of dust deposited on the surface of the filter bag over time is increasing. According to the procedure set by the pulse blower, the pulse blow valve triggers on in sequence. Compressed air inside the air bag is instantly blown out from each hole of the injection pipe and sprayed into the corresponding filter bag via the venturi. The dust adsorbed on the surface of the filter bag then falls off into the hopper and is discharged through the discharge valve Directly into the warehouse.

Features of Bag Dust Collector:

1. High efficiency≥99.5%

2. Low emission concentration ≤20um, but also ≤10um is possible after filtering according to practical situation

3. Low leakage rate

4. Material—carbon steel or stainless steel.

5. Simple Structure, easy maintenance

6. Suitable bags and bag cages fitted according to dust properties. Glass Fiber, needle felt, PTFE, p84., etc

7. The overhaul and bag replacement can be carried out for separate chamber under the condition that system blower and system run normally.

8. The whole set of equipment is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm

9. It is not sensitive to the characteristics of the dust, and it is not affected by dust and resistance.

INDUSTRIAL DUST COLLECTOR Technical Parameter

Type	Air Capacity（m³/h)	Gross filtration area（m³）	Net filtration area（m³）	Chamber Qty.	Filter bag		Air consumption（m³/min)	Impeller-type feeder	Tube screw conveyor	Air conveying slides
Type	Air Capacity（m³/h)	Gross filtration area（m³）	Net filtration area（m³）	Chamber Qty.	Qty.	spec.
PPCS32-3	6900	93	62	3	96	130×2450mm	0.27	300×300(mm) motor power 1.1KW		-
PPCS32-4	8930	124	93	4	128		0.37			-
PPCS32-5	11160	155	124	5	160		0.46			-
PPCS32-6	13390	186	155	5	192		0.55			-
PPCS64-4	17800	248	186	4	256		1.2		300mm30m³/h motor power 2.2KW	-
PPCS64-5	22300	310	248	5	320		1.5			-
PPCS64-6	26700	372	310	6	384		1.8			-
PPCS64-7	31200	434	372	7	448		2.1			-
PPCS64-8	35700	496	434	8	512		2.4			-
PPCS96-4	26800	372	279	4	384		1.2	400×400(mm) motor power1.5KW	400mm38 (m³/h ) motor power 5.5KW	-
PPCS96-5	33400	465	372	5	480		1.5			-
PPCS96-6	40100	557	465	56	576		1.8			-
PPCS96-7	46800	650	557	7	672		2.1			-
PPCS96-8	53510	744	650	8	768		2.4			-
PPCS96-9	60100	836	744	9	864		2.7			-
PPCS96-2×5	66900	929	836	10	960		3.0	2 sets 350×350(mm) motor power 2×1.5KW	2 sets 300mm2X21m³/h motor power 2.2KW	-
PPCS96-2×6	80700	1121	1028	12	1152		3.4			-
PPCS96-2×7	94100	1308	1251	14	1344		4.2			-
PPCS96-2×8	107600	1494	1401	16	1536		4.8			-
PPCS96-2×9	121000	1681	1588	18	1728		5.4			-
PPCS96-2×10	134500	1868	1775	20	1920		6.0			-
PPCS128-6	67300	935	779	6	768	130×3060mm	3.6	300×300(mm) 1.1KW	300mm motor power 2.2KW	- - -


PPCS128-9	100900	1402	1246	9	1152		5.4
PPCS128-10	112100	1558	1402	10	1280		6.0
PPCA128-2×6	134600	1869	1713	12	1536		7.0	305×915（mm) motor power XWD4-7-1/371.1KW		B250mm Air volume required 2m³/m2
PPCA128-2×7	157000	2181	2025	14	1792		8.3
PPCA128-2×8	179400	2492	2336	16	2084		9.5
PPCA128-2×9	201900	2804	2648	18	2304		10.7
PPCA128-2×10	224300	3115	2959	20	2560		12
PPCA128-2×11	247600	3427	3271	22	2816		13.1
PPCA128-2×12	269100	3738	3582	24	3072		14.3
PPCA128-2×13	294600	4050	3894	26	3328		15.5
PPCA128-2×14	314000	4361	4205	28	3584		16.7

FAQ about Hebei Taizhe Machinery Equipment Trading Co., Ltd.:

1. Q: Are you a factory or trading company?

A: We own 1 factory and have 2 cooperated factories, hebei taizhe machinery trading Co., ltd. is a trading company.

We have the improvement teams from design, manufacture....to installation, commissioning and staff training

2. Q: Where is your factory located? How can I visit there?

A: Our factory is located in Shijiazhuang City, the capital of Hebei Province, 1.5 hours way by high-speed rail from beijing to shijiazhuang

It's near the airport and train station.

3. Q: How does your factory do regarding quality control?

A: We test our machine before shipping. Our factory has gained ISO9001:2008 authentication.

4. Q: How long is the warranty?

one year warranty and free cunsultaion during the period of use.

5. Q: how to pay for the product?

L/C, T/T and Western union is available.

6. Q: how to consult about dust collector?

you just need offer us following information: working situation? Dust or fume characteristic? Filter area? Inlet temperature? Wind velocity? etc... our experts will put forward feasible plan for you ASAP.

Warranty:

12months Quality warranty period (after put into operation formally).

Provide technical guide for dust collector forever.

After Quality Warranty period of dust collector, will provide the spare parts with cost price.

All the machines provided by our factory will be tested before ship.

Packaging & Shipping

We test Dust Collector before it is packaged and transported:

Main part and relative valves, instrument: composite material box packed, rain-proof.

Will be marked on per part with the regulations on goods.

Steel parts will be loaded into container directly.

TZ-Pulse Jet Bag Filter is one of our main product, the whole set of dry industrial filtering device is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.

For more industrial pneumatic conveyor, please visit our website.

/product-pulse-jet-bag-filter.html