Precautions for Installing Industrial Waste Baler

1. The quality of the oil pump device has a very important impact on the smooth operation and service life of the pump, so the device proofreading operation must be carried out carefully and must not be rash. The support or base of the hydraulic pump of the industrial waste baler must be strong and strong, and the pump shaft of the hydraulic pump must be aligned with the motor.

2. The position, length and pipe diameter of the suction pipe of the oil pump should reach the accounting value, and strive to be simple; and let the pump not be larger than the cavitation margin during operation. The inner diameter of the suction pipe must not be less than the requirements of the rule. The suction pipe should not be too long. The bend at 90 degrees should not be more than two. It should be connected to the oil pump with a soft short connection.

3. The suction and discharge lines of the oil pump should have brackets.

4. The address of the installation oil pump should be spacious to facilitate maintenance work.

Check the temperature and vibration of the bearings during the test run after the hydraulic oil pump device of the hydraulic cardboard baling machine china. After loosening the coupling, use a spirit level to place it on the pump shaft and base of the electric oil pump. Adjust the wedge pads, check the level of the unit, and tighten the anchor bolts appropriately to avoid loosening. In order to prevent impurities in the pipeline from entering the pump, a filter should be installed in the pump glue for the pipeline of the new device, and its useful section should be 2 to 3 times the section of the suction pipe.

There are many types of packing belts on the market, and the quality is also uneven. So what are the characteristics of industrial waste packing machines and what occasions can they be used for? It may be difficult for users who have never used packing belts. Relevant characteristics of the strap material of the auto tie baler machine.

1. Small elongation: The elongation is one-sixth that of polypropylene (PP) tape, which can maintain the tension for a long time.

2, beautiful and not rusty: no steel belt rust pollution pollution objects, the color is bright.

3, strong temperature resistance: melting point is 260 degrees, no deformation below 120 degrees.

4, strong tensile strength: not only the tensile strength of steel belt, but also the resistance to impact ductility, can ensure the safety of your product transportation.

5. Good economic benefits: The length of 1 ton plastic steel belt is equivalent to 6 ton steel belt. The unit price per meter is lower than steel belt, which can save you costs.

6, good flexibility: sharp edges without steel belt, safe operation, neither hurt your hands nor damage the bundled objects.

Qunfeng is specialized in producing internet of things and weighing system, overground or underground vertical waste transfer station system, waste compacting station, arbage sorting equipment, waste transfer station project, single stream waste, paper, plastic, metal baler machine, composting project, weighing apparatus.

If you want to know more about baler machine, you can click here.

/