Name: AC85~AC260V Silicon controlled Dimmer
Brand: BOCHI
Availability: InStock

Product Details

Product Description

Brief Introduction

Welcome to use BMME-220 silicon controlled dimmer. The product output with a silicon controlled synchronous PWM functions. The output of absolute stability. The direct control of Gao Min sensitivity of LED beads, which does not appear to flicker. At the same time with infrared remote control function, and easy to use.

Specifications

Model	BMME-220
Input power	AC85~AC260V
Output signal	Silicon controlled
Max load current	The single output 1.5A
Output power	165W(110V)/330W(220V)
Dimming range	0%~100%
Grey step	256 levels
Switch size	L87×W87(mm)
Package size	L96×W91×H61(mm)
Gross weight	200g

Basic Features

1. 0 ~ 100% brightness adjustment, knob type stepless dimming & wireless remote control,dimmer, convenient and practical

2. Adjust the light stability of delicate soft, no flicker phenomenon.

3 PWM digital dimming & programs without current surge, LED life to achieve the best

4. 25%,50%,75%,100% , 4 DIY modes, fast adjust.

5. Delay OFF button, fluorescent indicator, users friendly..

6. Automatically adapt to AC86-250v working voltage.

7. Can be equipped with power repeater to expand power.

Conjunction Diagram

1. Connecting to LED strip:

Appearance Size:

Operating instructions

About the button

The detailed definition of the button

Exception Handles:

Malfunction	Causation	Solution
No Light	1.No power from the socket 2. Reverse connection of power 3.wrong or loose connection	1.Check the socket 2,Modify the connection 3,Check connection
Brightness of the LED is not even	1.Output wire too long, voltage drops 2. Wire diameter too slim, voltage drops. 3. Power supplier overloads 4,Controller overload	1. Reduce cable or use loop connection. 2,calculate the current and change to a wider wire 3,Change to another large power supplier 4. Add a power repeater
Cannot Remote	1. Remote battery is low. 2. Over remote distance	1. Replace a new battery 2. Reduce remote distance

Kindly Reminder

1.Power Source Selection

Power source must be DC constant voltage type of power supply. Due to the efficient output in some power supplies are only 80% of total, so please select at least 20% higher output power supply than the consumption of LED lights.

2.Power Voltage Selection

For constant current type of dimmer, the voltage from the power supply could be DC 12V-48V. The input voltage should be little higher than the total loaded voltage on LED lights. For instance, if single LED is 3.6V, 3 of them in series connection, total is 3.6*3=10.8V. Then 12V is the best option. As the same, for 6 LEDs in series connection, please use 24V. If using 48V input on single LED with dimmer, it will work fine due to the constant current type of dimmer will auto-adjust the voltage to keep constant current. It will do no harm on LED.