CGDI MSV80 BMW Car Key Programmer Support Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exclusively support in Domestic
6.Support BMW Key unlock.

CGDI MSV80 BMW Car Key Programmer CGDI Functions:

1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.

CGDI Prog BMW MSV80 Support Model list:

Model	Has key to match key	Without key to match	Read ISN code	Replace engine computer DME	BMW Key unkock	Working time
CAS1	support	support			support	1 minute
CAS2	support	support	support		support	1 minute
CAS3	support	support	support		support	1 minute
CAS3+	support	support	support		support	1 minute
CAS4	support	support	support			30 seconds
CAS4+	support	support	support			30 seconds

CGDI Prog BMW MSV80 Read MSV80 Specification: 
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus. 
Methods 2: can directly split engine computer (DME) to operate--connectline as follows:



MSV80/D80/D85/wiring in the experimental bench
 
CGDI Prog BMW MSV80 Software Update Guide:

Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.

CGDI Prog BMW MSV80 Firmware Update Guide:

Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".

Detail info about CGDI BMW MSV80 Software & Firmware Update pls visit Teah Support at the top section.

CGDI Prog BMW Customer Feedback:
CGDI BMW can reprogram EGS for 2009 BMW x5.
CGDI Prog BMW supports BMW 650i 2003 all key lost.
CGDI BMW can read and write the ISN EWS egs for BMW M5 F10 dct gearbox 2013. Can read from DME and write into egs.
CGDI PROG bmw f20 2014 mileage reset OK  
Read ISN DME MSD80 OK 5WK93628
Excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car

cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key

You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on a original BMW key to unlock(tested on e60 cas2)
and yes it is safe if downgrade for CAS3+.

Read ISN form MSV80 result OK
Read and write ISN cas 3 result OK

Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully

Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works

Instructions for cas4 F10 key programming:
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd.


CGDI BMW Prog FAQs:
Q1: How to authorize CGDI BMW EGS ISN function?
A1: The user needs to disassemble and wire the cable. There is no additional cable to work with.

CGDI Prog BMW MSV80 Package Includes:
 
1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line
 


Kellie Deng
Sales Manager 
Email : kellie@obdfamily.net 
Whatsapp: +86 18664982862
Skype: kellie-obding
Website :