Product Details

High-low temperature test chamber heating impact test cabinet

Model: YTST-108

Brief introduction and application fields:

The thermal shock tester is applied to test electronic chip IC, PCB, of semiconductor ceramic and

polymer materials physical changes, and test the bearing extent of the material structures and composite

material in an instant and continuous high temperature and extremely low temperature environment...

Main features of the equipment:

1. Standard combined design and popular in markets.

2. SUS#304 stainless steel, firm structure, waterproof ability.

3. Suitable for test with large quantity and volume products.

4. Adopt imported large LCD Chinese/English microcomputer temperature controller, easy setting, strong function.

5. Standard RS-232C communication interface device.

6. Unique circulation duct design and popular in markets.

7. Comprehensive security control design, adopt intelligent PID+SST/SCR inverse two-way synchronous output, including the slope of the advanced control logic.

8. Heating box and explosion-proof heater design, advanced PID servo control, security, stab ility and reliability.

9. Best after sales service: 12 months of free parts maintenance service.

10. Comply with major international test standards.

11. Customization is available & buyer's ideas are warmly welcomed.

In addition to the Thermal shock tester, we are also manufacturing:

Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal

Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp.

Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test

equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

For more technical details, please refer to the attached data sheet.

Model			YTST-056	YTST-087	YTST-126
Internal Dim.W×H×D(mm)			400×350×440	500×350×500	600×350×600
External Dim.W×H×D(mm)			1500×2050×2120	1600×2050×2220	1700×2050×2320
Pre-heat Limit			+200°C
Pre-cool Limit			-60°C -75°C
Test Temp. Range			+60°C ~+150°C; -10°C~-50°C; -10°C~-65°C
Performance	Temp. Constancy		±2°C
	Temp. Recover Time		Within 5 mins
	Heat-up Time	°C	150	150	150
		min	30	30	30
	Pull-down Time	°C	-50 -65	-50 -65	-50 -65
		min	90 90	90 90	90 90
Material	Exterior		Stainless steel plate + Powder Coated
	Interior		SUS # 304 stainless steel plate (Hairline Finish)
	Insulation		PU & Fiberglasswool
Systems	Circulation		siroco fan
	Heating		stripped wire heater
	Refrigeration		Compressor+Evaporator fins+water-cooling condenser
	Controller		1P
Other Components			Exper iment separation shelves(freely adjustable 2pcs)
Safety Devices			No fuse breaker,Motor overload protection High/low pressure shut off device, Open door operation prevention switch, Flow switch protector cooling water.

Power Source(K.W.)			AC 1Ψ 220V;3Ψ 380V 60/50Hz
			90 90	90 90	90 90

Other styles / size with different configurations are available upon request, welcome to enquire and purchase !

Except Hanging type heating impact test incubator, we can supply:

Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

CE, SGS, TUV, ISO 9001:2015 certified manufacturer.

Welcome to enquire and purchase!