electrovalve solenoid
USD $1 - $40 /Piece
Min.Order:20 Pieces
Ningbo Fenghua Gogo Automatic Trading Company Limited
solenoid valve
Model:
Operation Fluid Viscosity : below 20 CST
Working Pressure : 0~7 kgf/cm2
Max.Pressure Resistance : 10 kgf/cm2
Operating Temperature Range : -5~100℃
Voltage: DC12V,DC24V,AC24V,AC36V,AC110V,AC220V,AC380V
Voltage Range : ±10%
Material of Body : Stainless Steel or POM or Brass
Material of Oil Seal : NBR , EPDM , VITON
3V110-M5/06 |
3V210-08/06 |
3V310-10/08 |
3V410-15/10 |
3V120-M5/06 |
3V220-08/06 |
3V320-10/08 |
3V420-15/10 |
Technical Data:
Model | 4V210-06 | 4V220-06 | 4V230C-06 | 4V230E-06 | 4V230P-06 | 4V210-08 | 4V220-08 | 4V230C-08 | 4V230E-08 | 4V230P-08 | 3V210-06 | 3V220-06 | 3V210-08 | 3V220-08 |
4A210-06 | 4A220-06 | 4A230C-06 | 4A230E-06 | 4A230P-06 | 4A210-08 | 4A220-08 | 4A230C-08 | 4A230E-08 | 4A230P-08 | 3A210-06 | 3A220-06 | 3A210-08 | 3A220-08 | |
Valve type | 5/2way | 5/3way | 5/2way | 5/3way | 3/2way | |||||||||
Effective Cross Section Area | 14mm2(CV=0.78) | 12mm2(CV=0.67) | 16mm2(CV=0.89) | 12mm2(CV=0.67) | 14mm2 (CV=0.78) | 16mm2 (CV=0.89) | ||||||||
Port Size | In=Out=Exhaust=G1/8" | In=Out=G1/4" Exhaust=G1/8" | In=Out= Exhaust=G1/8" | In=Out= Exhaust=G1/4" | ||||||||||
Working Medium | 40μ Micron filtered air | |||||||||||||
Acting Type | Internal Piloted | |||||||||||||
Working pressure | 0.15~0.8MPa | |||||||||||||
Max. Test Pressure | 1.2MPa | |||||||||||||
Ambient Temperature | 5~50oC | |||||||||||||
Operating Voltage Tolerance | ±10% | |||||||||||||
Power Consumption | AC:5.5VA DC:4.8W | |||||||||||||
Insulation | F Class | |||||||||||||
Protection | IP65 | |||||||||||||
Wiring/Connector | Lead wire or DIN Connector type | |||||||||||||
Switching Frequency | 5 cycle/sec | |||||||||||||
Response Time | 0.05 sec |
LPG, natural, butan, propane gas solenoid valve Voltage:
DC - 12V,24V AC - 24V,120V, 240V@60HZ 110V, 220V@50HZ Tolerance: +/- 10%
Coils :S51B, 40VA(AC), 30W(DC), IP65 100%ED
SD01B, 35VA(AC),30W(DC),IP65,100%ED
SD02B,flying lead 35VA(AC),30W(DC),IP65,100%ED
LPG, natural, butan, propane gas solenoid valve Material:
Body - Brass or Stainless steel
Seal -NBR, EPDM, PTFE or VITON
Armature Tube - Stainless Steel 304
Plunger - Stainless Steel 430F
Stop -SS430F
Springs - SS 304
It is direct action type, are most popular valves for many conditions, especially in the water treatment system, such as water heater. It can start working at zero differential pressure. This type of valve can change the coils to be as explosion-proof solenoid valve or water-proof solenoid valve to be used in water, especially for the music fountain control. Thread mounting or flange mounting. With port size from 1/8"~2".
1,5/2 way valve with one head is spring return while for valve with two heads is electric or air controlled.
2,3/2 way valve is mostly used for single action cylinder.
3,5/3 valve can control pneumatic cylinder stopping at any stroke.
4,With both lead wire and connector type.
5,Equipped with suitable manifold,can support many valves working together
About us