High quality stainless steel angle seat pneumatic valve with proximity switch
The summarize of the pneumatic angle seat valve
The thread pneumatic angle seat valve(Y-type) is widely used for beer beverage canned line, printing and dyeing textile, gas industrial, pharmaceutical and medical equipment, chemical industry, high temperature sterilization, foaming machine, water treatment equipment etc.
Specification:
switch can be installed on every actuator,indicating the valve on-off with signal
*Long service life, economical investment.
*Compact in size and lightweight.
* Large flux, small flux resistance, no water hammer.
*Stem automatic correction, self-lubrication, maintenance free.
Max pressure : 1.6 Mpa(232psi)
pressure : 0.3~0.8 Mpa (43.5-116psi)
Material : CF8M / CF8
Seal : PTFE
Actuator material : CF8
Actuator size : 40mm, 50mm, 63mm, 90mm, 125mm
Applicable Fluid : water, alcohol, oil, fuel, steam, neutral gas or liquid, organic solvent, acid and lye
Max fluid viscosity : 600mm²/s
Fluid temperature : -10°c~180°c , 25°c~220°c
Ambient temperature : -10°c~80°c
Control type : Normally open, Normally closed single acting/double acting ,
Double acting
Connection : Threaded (BSP, BSPT, NPT), Welded, Flanged, Tri-clamp
Dimensions
1 Lndication rod (nylon) 9 Piston seal (FKM)
2 Actuator (CF8) 10 Seal spring (AISI 304)
3 pILOT PORT (1/8") 11 Connecting piece (CF8M/ CF8)
4 Stem (AISI316/ 304) 12 Body seal (PTFE)
5 Stem seal (PTFE) 13 Valve core (VF8M/ CF8)
6 Cap (PC) 14 Seat (PTFE)
7 Spring (steel 65Mn) 15 Gasket (AISI316/ 304)
8 Piston (Alu.alloy) 16 Body (CF8M/ CF8)
Image
1.Inner packing: opp bag, then carton box for each product 2.Outer packing: export standard carton, Foam outside protecting the goods against damage 3.Usually we ship your order by sea or by air... 4.We do our best to ship your order within 1 week after receiving your payment 5.We'll tell you the tracking number once your order has been sent 6.We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
Skype:live:hunter_1656