atlas copco compressor drain valve 4 way air valve aerosol extension tube
USD $5 - $50 /Piece
Min.Order:1 Piece
Ningbo Fenghua Gogo Automatic Trading Company Limited
discharge pressure switch time delay pneumatic vacuum breaker pressure
vacuum solenoid for daihatsu terios thermally activated vent strainer y-type
CGA540 Wall Mounted Medical Oxygen Regulator Flowmeter Medical Gas Pressure Regulators
SCG353A044 right angle solenoid diaphragm valve AC220V thread pulse jet valve
atlas copco compressor drain valve 4 way air valve aerosol extension tube
1. Brass ;
2. Stainless steel .
Specification
Pattern: | Two-port two-position | |||
Principium: | direct acting type | |||
Control mode: | normally close | |||
Valve body: | brass | |||
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C | |||
Working pressure: | 0~10bar | |||
Max pressure: | 10bar | |||
Voltage: | AC220V AC110V DC12V DC24V | |||
Medium: | Air ,water ,Liquid ,oil ect. | |||
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
Dimensions
(mm)
Features:
1) Option of without manual, with manual or flow control.
2) Valve body made of Aging-proof Corrosion-Resistant Reinforced Nylon for the long life duration.
3) Rugged synthetic rubber diaphragm provide the lead-proof seal.
4) Special valve configuration with the self-cleaning function, debris-tolerant.
5) Self-aligning bonnet permits fast and easy maintenance.
6) High-flow, low-friction-loss design.
Electrical Specifications
1) Solenoid: 24 VAC.
2) Inrush volt-amp: 24 VAC - 11.50 VA.
3) Inrush current: 0.34 amp.
4) Hold ng volt-amp: 24 VAC - 5.75 VA.
5) Holding current: 0.2 amp.
Materials of construction | |||
Parts in contact with the medium | |||
Valve of body | Brass | SS304 | |
Seals | NBR ,EPDM ,FKM | ||
Magnetic isolation pipe | SS304 | ||
Core | Stainless steel alloy | ||
Spring | SS304 | ||
The shading | Copper |
Picture
Shading Rings - Stainless Steel 304
small brass and plastic non return valves solenoid gas valve
2.Open from zero bar for low pressure system use;
3.High frequency of DIN plug coil
Founded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.
Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.
Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products.
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
solenoid gas valve
Skype:atcgogo