motorized gate valve handwheel valvula de control
USD $5 - $50 /Piece
Min.Order:1 Piece
Ningbo Fenghua Gogo Automatic Trading Company Limited
Fluorine plastic or Steel Valves Rubber lined diaphragm valve
electric trailer brake controller foam soap valve hydraulic actuator
hydraulic solenoid coil stainless steel expansion joint battery watering system
gas oven thermostat excavator hydraulic control valve ball valve grinding machine
niigata diesel engine mitsubishi stop solenoid valve stem seal
motorized gate valve handwheel valvula de control
1. Brass ;
2. Stainless steel .
Specification
Pattern: | Two-port two-position | |||
Principium: | direct acting type | |||
Control mode: | normally close | |||
Valve body: | brass | |||
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C | |||
Working pressure: | 0~10bar | |||
Max pressure: | 10bar | |||
Voltage: | AC220V AC110V DC12V DC24V | |||
Medium: | Air ,water ,Liquid ,oil ect. | |||
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
Model | Pipe | Orifice Diameter(mm) | Principium | CV | Body material | Seal | Work Pressure |
MI-03 | 1/8" 1/4" | 3 | direct acting | 0.3 | Brass , SS304 | NBR,FKM | 0-13bar |
MI-04 | 3/8" | 4 | 0.58 | NBR,FKM | 0-7bar | ||
MI-05 | 1/2" | 5 | 0.65 | NBR,FKM | 0-5bar | ||
MI-08 | 1/2" | 8 | 1.2 | NBR,FKM | 0-1bar |
Dimensions
(mm)
Orifice(mm) | A | B | C |
DN3 | 44 | 25 | 80 |
DN4 | 44 | 25 | 80 |
DN5 | 50 | 25 | 80 |
DN8 | 50 | 25 | 80 |
Materials of construction | |||
Parts in contact with the medium | |||
Valve of body | Brass | SS304 | |
Seals | NBR ,EPDM ,FKM | ||
Magnetic isolation pipe | SS304 | ||
Core | Stainless steel alloy | ||
Spring | SS304 | ||
The shading | Copper |
Picture
Type : Normal Close Type
Aperture of Flow Rate : 2.5mm
Joint Pipe Bore : 1/8" / 1/4" NPT is available
small brass and plastic non return valves solenoid gas valve
Hold ng volt-amp: 24 VAC - 5.75 VA.
Founded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.
Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.
Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products. We promise that we'll be responsible all the way to the end once our services begin.
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
solenoid gas valve
Skype:atcgogo