sink drain check valve return valve stainless steel spring check valve
USD $5 - $50 /Piece
Min.Order:1 Piece
Ningbo Fenghua Gogo Automatic Trading Company Limited
pneumatic operated knife gate valve brass ball cock valve automatic recirculation valve
brass ball valve italy variable flow control valve micro electric gas solenoid valve
butterfly valve tyco lpg pressure relief valve automatic fill valve
solenoid direction valve rotary valve for cement sea water gate valve
proportional valve controller solenoid valve smc spigot gate valve
sink drain check valve return valve stainless steel spring check valve
1. Brass ;
2. Stainless steel .
Specification
Pattern: | Two-port two-position | |||
Principium: | direct acting type | |||
Control mode: | normally close | |||
Valve body: | brass | |||
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C | |||
Working pressure: | 0~10bar | |||
Max pressure: | 10bar | |||
Voltage: | AC220V AC110V DC12V DC24V | |||
Medium: | Air ,water ,Liquid ,oil ect. | |||
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
Type : Normal Close Type
Item | Parameter |
Ration 5L | Preact 0.5L |
Displayed Value when main Valve Closed | ≤4.85L |
Voltage Input | AC230V 50HZ, |
Voltage deviation | -10%~+15% |
Relative Humidity | ≤95% |
Insulating Strength | ≥20MΩ |
Lead Length | 1.5m(standard) |
Power | 2x5.5W |
Coil Class | H |
Life cycle | Under normal working condition, the continuous cycle time is above 1000,000 |
Dimensions
(mm)
Orifice(mm) | A | B | C |
DN3 | 44 | 25 | 80 |
DN4 | 44 | 25 | 80 |
DN5 | 50 | 25 | 80 |
DN8 | 50 | 25 | 80 |
Materials of construction | |||
Parts in contact with the medium | |||
Valve of body | Brass | SS304 | |
Seals | NBR ,EPDM ,FKM | ||
Magnetic isolation pipe | SS304 | ||
Core | Stainless steel alloy | ||
Spring | SS304 | ||
The shading | Copper |
Picture
3) Inrush current: 0.34 amp.
small brass and plastic non return valves solenoid gas valve
3) Inrush current: 0.34 amp.
SD02B,flying lead 35VA(AC),30W(DC),IP65,100%ED
Founded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.
Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.
Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products. We promise that we'll be responsible all the way to the end once our services begin.
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
solenoid gas valve
Skype:atcgogo