small gas furnace parts of a furnace dungs gas valve
USD $5 - $50 /Piece
Min.Order:1 Piece
Ningbo Fenghua Gogo Automatic Trading Company Limited
small gas furnace parts of a furnace dungs gas valve
1. Brass ;
2. Stainless steel .
Specification
Pattern: | Two-port two-position | |||
Principium: | direct acting type | |||
Control mode: | normally close | |||
Valve body: | brass | |||
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C | |||
Working pressure: | 0~10bar | |||
Max pressure: | 10bar | |||
Voltage: | AC220V AC110V DC12V DC24V | |||
Medium: | Air ,water ,Liquid ,oil ect. | |||
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
One-stop service:We always focus on one stop service which enable us to provide you and this
means faster and easier for you!
2. What spare parts can you supply?
All kinds of spare parts of XCMG,Zoomlion,Sany,Shantui,Shacman,Lugong,Sdlg,XGMA,CUMMINS ENGINE,etc.
3. What kind of payment terms are available?
We prefer T/T in advance. But if you have any other payment terms, we are so willing to make adjustment for you.
Motion Pattern : Direct Drive Type
Type : Normal Close Type
Aperture of Flow Rate : 2.5mm
Cv Value : 0.23
Joint Pipe Bore : 1/8" / 1/4" NPT is available
Operation Fluid Viscosity : below 20 CST
Working Pressure : 0~7 kgf/cm2
Max.Pressure Resistance : 10 kgf/cm2
Operating Temperature Range : -5~100℃
Voltage: DC12V,DC24V,AC24V,AC36V,AC110V,AC220V,AC380V
Dimensions
(mm)
Orifice(mm) | A | B | C |
DN3 | 44 | 25 | 80 |
DN4 | 44 | 25 | 80 |
DN5 | 50 | 25 | 80 |
DN8 | 50 | 25 | 80 |
Picture
small brass and plastic non return valves solenoid gas valve
LPG, natural, butan, propane gas solenoid valve Characteristic:
1.Direct lifting diaphragm construction;
2.Open from zero bar for low pressure system use;
3.High frequency of DIN plug coil
4.Medium:Air, City Gas, Water, Oil, Petroleum, etc.
5.Pressure:2W21: 0.00MPa ~ 1.0MPa.
6.Port Thread:BSPP ,BSPT ,NPT ,Flange, UNF, M8X1
Solenoid valve Temperature:
NBR Seal: 14F to 176F , -10 to 80
EPDM Seal: 14F to 250F , -10 to 120
VITON Seal : 14F to 300F, -10 to 150.
Port Size:3/8,1/2,3/4,1,1 1/4,1 1/2,2
Founded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.
Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.
Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products. We promise that we'll be responsible all the way to the end once our services begin.
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
solenoid gas valve
Skype:atcgogo