plastic melt flow rate index meter
USD $1,200 - $1,500 /Set
Min.Order:1 Set
Hongjing Test Instrument Co., Ltd.
plastic melt flow rate index meter
1. Outlet diameter: 2.095 mm / 0.005 mm.
2. Length of discharge port: 8 + 0.025 mm
3. Loading cartridge diameter: 9.550 mm / 0.025 mm
4. Loading tube length: 152 + 0.1 mm
5. Piston rod diameter: 9.475 + 0.015 mm
6. Piston rod length: 6.350 + 0.100 mm
7. temperature range: room temperature - 400 C
8. constant temperature accuracy: + 0.5 degrees C
Product introduction
It is used to measure the MFR value of melt flow rate of various polymers in viscous flow state. It is suitable not only for engineering plastics such as polycarbonate, polysulfone, fluoroplastics and nylon with higher melting temperature, but also for melting polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin and so on. Low temperature plastic testing is widely used in plastic production, plastic products, petrochemical and other industries, as well as related colleges, research institutions and commodity inspection departments.
This instrument is suitable for the determination of melt mass flow rate and melt volume flow rate of thermoplastic in GB/T3682-2000. This standard is equivalent to ISO 1133:1997.
The main body is a desktop structure, reasonable design, stable and reliable performance, beautiful appearance, easy to operate, the use of high-performance, high-precision control instruments with high sampling accuracy, control speed, the use of precise PID algorithm for constant temperature control.
Main technical parameters
Outlet diameter: 2.095 mm / 0.005 mm.
Length of discharge port: 8 + 0.025 mm
Loading cartridge diameter: 9.550 mm / 0.025 mm
Loading tube length: 152 + 0.1 mm
Piston rod diameter: 9.475 + 0.015 mm
Piston rod length: 6.350 + 0.100 mm
2. Standard test load (level 8)
3, temperature range: room temperature - 400 C
4, constant temperature accuracy: + 0.5 degrees C
5, display resolution: 0.1 C
6, temperature recovery time: less than 4 minutes.
7. Cutting mode: automatic cutting.
8, constant temperature time: can work thousands of hours continuously.
9, automatic printout
10, outline size: wide * thick * high =250 * 350 * 510
11, supply voltage: AC220V + 10% 50HZ
About the after sale service:
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
About the production time:
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
About the install:
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.