Solar panel PV module surface abrasions detection machine/anti-damage testing equipment
Standard
According to IEC61730 testing standard requirement
Purpose
To determine whether any front and rear surfaces of the pv module made of polymeric materials are capable of withstanding routine handling during installation and maintenance without exposing personnel to the danger of electric shock
The Mainly specifications
Test stand frame | 1.The raw materials: Aluminum profile ( Firm and Antirust) 2.The testing standard dimension: satisfy 2.0m×1.0m pv modules ( adjustable, suit for different pv modules dimension) 3.Included the Tracking pulley wheel |
Testing Fixture | 1.The raw material:Use adopt carbon steel blade 2.The steel blade thickness:0.64mm±0.05mm ( It’s suffficiently rigid as not to be bend sideways during the test) 3.The top angle of steel blade :90±2° and with rounded with radius 0.115mm±0.025mm 4.The blade supply the force : 8.9N±0.5N
|
The test fixture speed | 150±30mm/s |
Control ways and display ways | Touch screen |
Testing Procedure
1. Position the PV Module horixontally with the test surface facing upward
2. The test fixture is to be placed on the surface for 1 min and then drawn across the surface of the pv module at a speed of 150mm/s±30mm/s,repeat the procedure five times in different directions considering the most critical points
3.Repeat step 1 and step 2 for other polymeric surface of the pv module if applicable
Fixture imges show
You May Like
- Helmet goggles impact testing machine /Goggles liner impact testing equipment
- ECE R22.05 Helmet Motorcycle Roll-off Testing Machine Judge the Stability of Helmet Wear helmet
- Protective Mask Respiratory Resistance Testing Equipment
- Breathing Mask Air Tightness Testing Machine
- Breathing Mask Air Tightness Testing Equipment
- Breathing Mask Air Tightness Tester/Testing Machine
- Breathing Mask Tensile Testing equipment/Tensile strength testing machine
- Exhalation Valve Cover Strain Testing Machine for Mask
- Protective Mask Respiratory Resistance Tester
- Breathing Mask Air Tightness Testing Machine
Popular Searches
Find Similar Products By Category
You May Like
- EN149 EN143 mask Mechanical strength testing machine
- Foam materials Resilience Elasticity Tester
- Elastic material Testing Machine
- HOTOTECH LCD Screen front behind shaking testing machine testing equipment
- Computer system softball rebound coefficient testing machine
- EN 13158 Rigity Testing Machine for Kneecap
- EN960 standard Half Headform with magnalium alloy material
- Polyurethane Full Headform with EN960 standard
- Helmet impact testing headform with EN960 standard
- Rosewood Helmet Head Form
- Magnesium Alloy Full Headform with EN960 standard
- Aritificial Metal Full Headform for helmet testing
- ANSI Z89.1 impact testing Force Transmission Headform with aluminum alloy materials
- Aluminum alloy full headform with EN960 standard
- Silico Gel Material Antigas Mask Headform