IEC61215-2:2016 the newest standard Dynamic Mechanical Load tester /Testing machine for PV module
USD $1,200 - $1,800 /Set
Min.Order:1 Set
IEC61215-2:2016 the newest standard Dynamic Mechanical Load tester /Testing machine for PV module
standard
According to IEC 61215,UL1703,IEC 61646
purpose
verification and ensure component under the different install angle suffer wind ,snow,or cover ice
etc static ,dynamic load ability.width use to check PV component resistance press strength test ,
adopt dynamic holding press technical , simulate load test, in order to products under the load statue
resistance press ability.
The Main technical parameter
Product Name | Dynamic Mechanical Load tester /Testing machine for PV module |
Machine table size | L 320 × D 180 × H 195 cm |
Test positive load | The max 5400 Pa |
Negative load | The max 24 00 Pa |
Material | Aluminum extrusion structure , platform |
Cycle times | Free setting |
Dynamic load test frequency | 7s±3s |
Dynamic load | 1000pa, 1000times |
Pressure control accurate | 5% |
pneumatic and force value feedback ways | low friction force cylinder, tensile pressure sensor |
Testing sampling size | 2000mm×1000mm (can customized) |
Current continuity system | DC power, DC 150V/2A, real-time monitor module inner current continuity |
Cyliner | 4 groups , in total 8 pieces |
Single cylinder the maximum output | 200kg |
Cylinder telescopic stroke | 125mm |
Sucker | 8 groups , in total 32 pieces |
Sucker diameter | 120mm |
Sucker (with cylinder) space horizontal and vertical | ≤200mm |
Sucker angle | can rotation 15° |
Control ways | Computer control |
Interface display | Computer with real-time curve display |
Fault function | Fault alarm function |
image show
1.High quality and best after-sell service
2.100% quality inspection before delivery
3.Managment Innovate
4.Strong R & D team
5.Can handle customers's feedback problems and doubt timely
6.Our testing machine have one year Warranty time