AS/NZS3112 Australian New Zealand Plug Socket Gauge
AS/NZS3112 Australian New Zealand Plug Socket Gauge
standards: Standard: AS/NZS3112, BS1363-2, VDE0620-1:2010-02, GB1002, GB1003 etc.
- Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
- Surface corrosion and abrasion resistance can resist normal contact corrosion and not embroidered patch (the operator hand may exist in the sweat, the corrosion effect equivalent to NACL salt solution or NH4CL salt solution corrosion);
- Material hardness is more than 60HRC;
- Material thermal expansion coefficient is small, dimensions and tolerances is stable and reliable.
1 | AS/NZS3112-Fig2.5 | pressure test apparatus for insulation on insulated plug pins at high temperature |
2 | AS/NZS3112-Fig2.6 | impact test apparatus for insulation on insulated plug pins at low temperature |
3 | AS/NZS3112-Fig2.9 | Temperature rise testing box |
4 | AS/NZS3112-Fig2.10 | Copper of temperature rise testing |
5 | AS/NZS3112-Fig2.8 | Plug bending test device |
6 | AS/NZS3112-Fig3.1 a.b.c | gauge for depth of no-contact test |
7 | AS/NZS3112-Fig3.6 | device for checking the resistance to lateral strain (three pin gauge) |
8 | AS/NZS3112-Fig3.7 | device for checking the resistance to lateral strain (two pin gauge) |
9 | AS/NZS3112 figure A1 | gauge for three-pin 250 v max flat-pin plugs |
10 | AS/NZS3112 figure B1 | gauge for two-pin flat-pin 125 v max. plugs (with parallel pins) |
11 | AS/NZS3112 figure C1 | Three-pin test plug with flat pins for full insertion test and the finger test during normal insertion test. |
12 | AS/NZS3112 figure D1 | Three-pin test plug with flat pins for abnormal insertion test . |
13 | AS/NZS3112 figure F1 | Plugs and socket-outlets for use in extra-low voltage circuits |
14 | AS/NZS3112 figure G1 | Three-pin test plug with flat and round pins for the full-insertion test and test finger test during normal insertion test |
15 | AS/NZS3112-2.13.9.1 | 18N Australia plug testing device |
16 | Item 3.3.4.1 | Test gauge of Minimum Pullout force |
17 | Item 2.3.2 /figure 2.3 | No go gauge of socket aperture |
18 | Item 3.14.8.2/figure 2.1(a),(b),(c) | Plug of socket temperature rise testing |
19 | Item 2.8.1 | Test pin of distance testing gauge |
