Product Details

Medical Mask Disinfection Machine UV sterilization furnace

Can be used to sterilize air and objects. Widely used in hospitals, medical supplies (such as masks, protective clothing), food, tea food and beverage processing and packaging equipment, food factories, cosmetics factories, dairy factories, wineries, beverage factories, bakeries and cold rooms. And can extend the product shelf life and other standards. Sterilization parameters Ultraviolet irradiation sterilization sterilizes food, which can effectively kill microwave organisms (such as E. coli, mold) or cause the total number of bacteria to decline to increase food sterilization. The key to using these two physical methods to sterilize food is to choose suitable conditions to minimize the damage to the original ingredients of the powdered food to achieve the purpose of sterilization. According to the results obtained through comparison tests, the use of microwave sterilization technology can minimize the original ingredients of food, and can effectively control the total number of bacteria and the number of deadly bacteria.

Executive standard

This product complies with GB 4789.2, GB 4789.3, GB 4789.4, GB 4789.5, GB 4789.10 and other standards.

Full length of equipment	2000mm
UV working area	1000mm
Feeding operation area	500mm
Discharge area	500mm
Height of entrance	200mm (adjustable)
Entrance and exit width	500mm
The distance between the conveyor belt and the ground	750 ± 50mm

The Main Parameters: 1. The outer body of the working area tunnel: a set of 1.2mm high-quality stainless steel Model: A3 2. The inner cavity of the working area tunnel: a set of 1.0mm mirror stainless steel plates Model: # 212 3. Body support frame: a set of Fangtong steel Model: 2 ″ Fangtong 4. Air transport system: one set of forced air exhaust fan 5. Thermal insulation material: vacuum aluminum silicate + silk cotton double layer Model: 60K 6. Conveyor belt: Teflon mesh belt 7. Balance device: flat water foot cup Model: 50 * 12 * 100mm

Equipment electrical parts

1. Main switch: 15A 2. Total power: 1.5KW 3. Range of inorganic belt speed regulation: 0-5m / min 4. Transportation motor: 800W 5. Governor: 500W 6. Exhaust fan: CY-125 7. Ammeter: a set of 50A 8. Working voltage: 220V ± 5% three-wire system 50Hz

Sterilization device

1. Effective radiation of ultraviolet light source, the lamp tube length is 600mm 2. 16 UV ultraviolet sterilization lamps * 20W ultraviolet lamps are installed in the top, bottom, left and right, 360 ° sterilization.

protective device

1. Overvoltage and overcurrent protection 2. Fault alarm prompt 3. Equipment overload protection

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.