1. Name

Model

Simulation vehicle transportation vibration table

BND-ZD-100

2. Use

This machine is used for toys, electronics, furniture, gifts, ceramics, packaging and other products to test simulated automobile transportation.

3. Applicable Standards

Accord with the U.S. and Europe transportation standard, EN, ANSI, UL, ASTM international transport standard

4. Principle

This equipment manufactures according to the American and European transportation standards, and improves refer to the American similar equipment. Using eccentric bearing in a whirl produce ellipse trajectory to simulate a car or the goods produce vibration and impact during the ship transport.

Let the test platform fix in eccentric bearing, when eccentric bearing turns, the plane of test platform produce oval up and down movement before and after, adjust the eccentric shaft with rotational velocity equivalent to adjust a car or ship's speed.

5. Performance parameters

5.1. Model

BND-ZD-100

5.2. Table size

1000 ×1200mm

5.3. Motor power

1 HP (750W)

5.4. Maximum load

100KG

5.5. Revolving speed

100-300 RPM (revolution/ per minute)

5.6. Speed adjustment mode

DC speed adjusting

5.7. Power

Single-phase three-wire 220V

5.8. Speed display precision

1RPM (revolution/ per minute)

5.9. Vibration mode

Reciprocating Type (elliptic type vibration)

5.10. Amplitude (P - P)

25.4mm (1 inch)

5.11. Time setting range

0 seconds ~ 99.99 hours

5.12. Machine weight

About 100KG

6. Characteristics

6.1 Vibration frequency digital display, high precision

6.2 Synchronous mute broadband transmission, low noise

6.3 Sample clamp using guide rail type, safe and easy to operate

6.4 Heavy channel steel base with damping rubber, easy to install, strong load, stable operation

6.5 Restructuring according to the European and American similar equipment, rotary vibration, accord with Europe and the United States transportation specification

7. Related to simulate transportation vibration table test standard requirement for equipment is as follow

ISTA Test standard is American transport association standard, ASTM is American material association standard. Two standard requires the simulate transport vibration equipment: amplitude is 25.4 mm (1 inch, fixed), frequency is 1.5-5 HZ (or 150-300 RPM adjustable), the experiment basis is: T = 14200 / CPM (base on the total vibration frequency of 14200 times), test speed select mode.

ISTA/ASTM standard test method table