UL1439D Sharp Edge Tester manufacture
UL1439D Sharp Edge Tester manufacture
Product Explanation:
Sharp Edge Tester meets the standard requirement of UL1439D, and it is used for testing whether the sharp edge of the electrical products, such as computers, daily household appliances and electronic equipments, is hazardous to user in touchable places. It is used for safety testing.
Standard NO. of American UL-1439
Volume: 184×35×52 mm
Weight: 132 g
Manufacturer: TES
Accessory: TC-3 TAPE KIT(21 pcs)
Application Method:
1.Put the pressure testing cap on the tester
2.Put the pressure testing cap closes to the tested edge and move the cap along the tested edge for 2 inches with a 0.68kg force, then return to the starting point. The whole distance will be 4 inches
3.After the movement, check the pressure testing cap. If the outermost 2 layers(the simulative skin) have been scratched off, the edge is considered as the sharp edge.
Specification:
This tester is designed for the standard of UL. The UL company sets up an objective standard to decide whether an edge meets the safety requirement. Most of the UL standards to the consumption products,such as edges, protruded parts, corners, cutouts, coiled rims and handles ,need to smooth out to avoid getting hurt.
You May Like
- IEC60335 Refrigerator Base Stability Tester around table inclined plane test
- IEC60065 dielectric Strength Test device
- IEC60068 Programmable Thermal Shock Test Chamber
- UV accelerated aging weather test chamber with 8 UV lamps
- UV accelerated aging weather test chamber with 8 UV lamps
- PTI tracking index lab test equipment
- IEC 60065 Dielectric strength test instrument
- iec60695-2-10 electronic glow wire tester with thermocouple
- Single arm drop test machine for 80kg package
- 80kg load box test single-arm package free fall drop tester
Find Similar Products By Category
You May Like
- ISO2248 double arm package free fall drop tester
- touch screen click and marked life test machine
- Mobile phone soft pressure testing machine
- ASTM C241 apparatus for abrasion resistance test of stone
- ASTM C241 Abrasion Resistance test machine of Stone
- ASTM C241 Abrasion test machine with alundum NO.60
- ASTM test apparatus for abrasion resistance of all types of stones
- ASTM standard Test machine for stone abrasion with NO.60 abrasive sand
- Abrasion resistance test machine for limestone use in laboratory according to ASTM standard
- IEC60335 Power cord flexibility tester for household appliance
- heat resistance stainless steel ball pressure tester
- IEC60068-2-75 Pendulum Impact Test equipment, hammer strike test device
- Motor Transport Simulation Shake Table, Transportation vibration tester
- PCT high pressure climate accelerated aging test equipment
- using a steel ball testing drop ball impact strength test machine IE C60950