IEC60884 Socket protection test pin with 1N and 20N force
IEC60884 Socket protection test pin with 1N and 20N force
BND-14B
Technical Parameters:
1, Test Probe Length:80mm
2,Probe Diameter:1.0mm
3,Material:The handle is made of nylon, tip is made of hardened steel
4,Standard: IEC60884 ,IEC61032 Fig.10
1 Product Explanation
The socket protection door test needle probe meets the standard requirements of IEC 60884&GB2099 , mainly used for checking the electronic shock safeguard and the normal operating function of socket with protection door. According to the related requests ,a set of test probe has two sticks, respectively with a 1N and 20N thrust. This manual focuses on against electric shock protection test.
2 Method of Application
First, use the 20N socket protection door test probe to exert a 20N thrust to the most unfavorable position of the protection door at three directions in sequence, at the same position of three directions with a 20N thrust for about 5 seconds, the metal part cannot touch the live parts of the socket.
NOTE: During the operation, the probe cannot be rotated. When the probe changes from one direction to another direction, do notexert forces, and the probecan't pulled out.
Then ,use the 1N socket protection door test probe and exert a 1N force to three directions. Each direction for about 5 seconds, the metal part can't touch the socket with the electric components.
NOTE: This test requires independent touch, after each touch the probe must be pulled out.
How to order
1. Place the order and pay directly if you have no question to the product. 2. If you have some questions, don't bother to send me a message to ask. 3. After you have paid the money, we will deliver the goods as soon as possible. |
Packaging and Shipping
1. Aluminium box and carton box, careful and tight package, make sure the package is intact. 2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order. 3. The shipping time is different, it depends on the distance bewteen us. At usual, exclude the preparing time, the goods would be sent to you in 5days. |
You May Like
- Shredder wedge probe conformance to U L 60950
- High Quality Probe 43 Rectangular Test Probe For House Safely
- Discount! IEC 61032 test pin 12 with 50mm test probe
- IEC standard electrical 50N test probe with 12.5mm test sphere
- IEC61032 Test Lead Accessibility Probe With 75N force
- IEC60695 IEC61032 IEC60335 short test probe electrocute prevent test probe pin 13
- IEC60065 test probe with 50mm length pin for preventing the electrocute shock
- IP2X Test Probe 12.5mm Test Sphere with handle for IEC60529 standard
- Rigid Test Lead 80mm test probe For household Electrical for IEC61032
- IEC61032 test prbe b / IP2X Joint Test Finger
Find Similar Products By Category
You May Like
- Quality Insurance! IEC61032 IEC60529 IP3X Test Probe C With 3N Force
- IEC60529 IP1X Test Probe with steel ball and 50N force
- hot sell! IEC61032 Test Rod, test probe 31, Accessibility probe
- IEC60065 short test probe,long test probe, electrocute prevent test probe pin 12 and 13
- Test lead wire Uninsulated Live Parts 1N/20N probe pin
- IEC61032 test pin 12 with 50mm test probe for electrical safety test
- IEC61032 food waste cone test probe 31
- IEC60335 scratching tool tip hardened steel k10 scratching test probe
- Handle With 12.5mm Stainless Test Sphere for IEC61032 Figure 6
- IEC61032 IP2x jointed test finger test probe b
- IEC60335 K10 scratching tool tip for scratch abrasion resistance test
- U L 1025 test finger nail with 50N force
- Quality Insurance! IEC60065 IEC60335 Creepage Distance Test Card PD27
- IEC60335-2-24 Scratching Tool Tip in K10 for safety Test
- Factory price supply IEC60884 1N and 20N accessibility test pin