Free Shipping IP3X Safety Test Finger IEC61032 Figure3 Test Probe C
Free Shipping IP3X Safety Test Finger IEC61032 Figure3 Test Probe C
Test Probe C/ IEC61032 IP3X Test Probe C
Article NO.:BND-C
Basic Introduction:
1, According to: IEC61032:1997/IEC60529:2001 AND UL
2, IP3X Test Probe C ( Test Probe C) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances.
Technical parameters
1, Test Probe Length :100mm
2, Test Probe Diameter:2.5mm
3, Dam- sphere Diameter:35mm
4, Handle Diameter:10mm
5, Handle Length 100mm
6, According to IEC61032 figure 3 (the Test probe C), table 6
Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a tool.
Application:
1, Standard test refers to the joint part can't touch the live parts or close to the dangerous parts, and 35mm circular baffle can not be enter .
2, In the test requirement for preventing access to the hazardous parts, Test Probe C/D need to be with push force 3±0.3N or 1±0.1N
Note:
For the without force products,please use with the dynamometer.
Pictures showing:
You May Like
- IEC61032 Test Probe 41ent probe
- IEC60045 IEC61032 standard IP2X test probe B Min. Order 1 Piece test probe B
- Unjointed Finger Probe IEC Rigid finger test probes
- IEC61032 IEC60065 Test Finger Probe ultrasonic test probe
- Document Shredders Accessibility wedge probe
- U L1278 figure 9.1Finger Probe PA160
- PA100 Joint Finger Probe test finger in testing equipment
- U L1278 figure 9.1 PA160 test probe
- IEC 61032 Test Probe 41 with 30mm diameter head
- IEC61032 standard Articulated Test Finger for electronic product
Find Similar Products By Category
You May Like
- UL982 Articulated Test Finger for safety test
- UL60950 Current wedge test probe
- Document Shredders jointed test probe
- Glow Wire Loop Replacement
- Nickel Loop for Glow Wire Tester
- Uninsulated Live Part Probe PA130
- PA160 test probe for hazardous moving part
- IEC 60884 Socket protection Test Pin Probe
- IEC61032 standard test finger for toy safety test
- IEC 61032 jointed test finger for children toy safety test
- IEC61032 IP1X Test Probe A with 50N force
- IEC61032 IP2X test finger for safety exam on electrical product
- IEC 60335 Scratching Tool for Testing Refrigerator Door
- IEC 60335-2-24 Figure11 Scratching Test Tool for Refrigerator
- IP4X Test Probe with 1N force conformance to IEC61032