Ⅰ, the device name: IPX5,6 rain test equipment

Ⅱ, the device model: BND-IPX56-800

Ⅲ, the standard : IEC60529

Ⅳ, the device consists of: respectively, by laboratory test bed, water tank, control box, product dehydration buffer, turntable, and sprinkler system.



Ⅴ, The main technical parameters:

1, the overall size of the test chamber: 1000 × 1300 × 3300㎜(L*W*H)

2, the inner box dimensions: 800 × 800㎜ ×2700mm(L*W*H)

3, the sprinkler system: water pump, pressure gauge, stationary nozzle holder, an area of: 800 × 800㎜

4, installed above the two nozzle heads. .one piece IPX5 nozzle and one piece of IP6 spray nozzle.

5, the inner diameter of orifice: 1 ~ φ6.3mm, IP5 (grade), 2 ~ φ12.5mm, IP6 (grade)

6, water pressure: 100 ~ 150kpa (by flow regulator)

7, spray flow: IP5 (grade) 12.5 ± 1 (L / min), IP6 (grade) 100 ± 5 (L / min)

8, the turntable: φ600MM speed: 3 ± 1R / min

9, water Duration: 3,10,30,9999min (adjustable)

10, run-time control: 1M ~ 9999min (adjustable)

11, water circulation system to ensure water recycling

12, by the water: the top surface of the product

13, water pressure gauge, water pressure can be displayed

14, the control system: Longhorn company developed touch-screen control system.

15, as a test of tempered glass box outdoor waterproof wall, stainless steel square pass as a stent.

Ⅵ, The structural principle:

The basic principles of the design of the device: a water tank located at the bottom right side of the control box by internal stainless steel pumps and pumping pressurized and then sent to the upper nozzle, spray nozzle perpendicular to the turntable on top of the sample, and then scattered the inside of the tank, thereby forming a water circulation system. Pump outlet design flow meters, pressure gauges, solenoid valves and other control components. Waterproof inner tank mounting speed dial on the control panel.



VII Material:

1, nozzle: stainless steel tube

2, water tank: 304

3, sealing plate material: Just lower glass 5MM thick glass top PC plastic transparent plate .

4, frame material: 304 stainless steel square pass, sand surface,