ZONHOW mobile drop impact tester

Overview

• ZONHOW mobile drop impact tester is to simulate the user in the process of the use of mobile phones from the hands, pocket, or on the desktop fell to the ground in the process of test, in simple terms, is to test the product drop resistance, resistance to fall off ability the better show the product in the smaller the possibility of damage after fall off onto the floor.

Application

• ZONHOW mobile drop impact tester is used to evaluate the effect of the product on the performance of the product when it is actually used.It applies to mobile phone, PDA, telephone, electronic dictionary, CD, MP3, adapter and other small consumer electronics products for the original posture and accelerated drop test.

Operation method

• Screen visible area of not less than 40% of chassis front surface area of mobile communication handsets should be able to fall in free fall from height is 500/1000 mm, besides allow surface abrasion, small pits, function, appearance and assembly should be accord with the requirement of related standards.

Drop test——1.0m and 1.5m test steps 

• Remark:1.0m and 1.5m falls, in principle, in parallel, with half of the samples tested.

A. 1.0m drop test 

1.Note: the mobile phone is in the starting state, and the mobile phone is 6 sides with the 1.0m height.Increase the open double main buttons of slide surface and the surface of the battery) fell on the plate thickness is 10 mm drop testing machine, drop sequence is: the back of the bottom, left, right, - at the top of the front - - (cell surface - main buttons).

2.Determination criteria:

1). Appearance requirements: do not allow any degree of burst and deformation on the surface of the mobile phone, and the shell separation phenomenon, but allow a certain degree of wear and tear;

2). Functional requirements: no failure or INT is allowed in the mobile phone function, and the phone should not be allowed to drop off and the battery will fall off when falling.

3).Test requirements of electrical performance: it is not allowed to exceed the standard of mobile phone RF indicators (standard test items);

4).Disassembly inspection requirements: the internal components of the mobile phone are not allowed to be loose or damaged, as well as the phenomenon of virtual soldering. Cracks are not allowed in the solder joints.

B. 1.5m drop test 

A.Note: the mobile phone is in the starting state, and the mobile phone is 6 sides with 1.5m high straight plate.Increase open double main buttons of slide surface and the surface of the battery) fell on the drop tester iron plate, order fall: bottom, left, right, back - top of the front - - (cell surface - main buttons).

B.Determination criteria:

1). Appearance requirements: do not allow any degree of burst and deformation on the surface of the mobile phone, and the shell separation phenomenon, but allow a certain degree of wear and tear;

2). Functional requirements: do not allow any failure or INT of the mobile phone function, allowing the cell phone to drop off and the battery to fall off;

3).Test requirements of electrical performance: it is not allowed to exceed the standard of mobile phone RF indicators (standard test items);

4).Disassembly inspection requirements: the internal components of the mobile phone are not allowed to be loose or damaged, as well as the phenomenon of virtual soldering. Cracks are not allowed in the solder

Real imagines for your better reference

Another model: Mobile directional drop tester(1.5m/2m or customize)

• 1.Are your company a trading one or a factory ?Factory + trade (integration),10 years focusing on test instruments field,3 years exporting experience.

OEM is also acceptable for us.

• 2.What’s the delivery term?

At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20

working days after deposit receipt. If you are in urgent need, we can consider making special

arrangement for you.

• 3.Do you accept customization service?

Yes, of course, we can not only offer standard machines, but also customized machines according to

your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.

• 4.What is the order process?

Inquiry - quotation - communication - order confirming - deposit payment - production - testing and

debugging - balance payment - packing - delivery - customer receiving - after service. 

• 5.What is your warranty ?
            - 12 months product warranty.Free components will be provided if any performance failure occurs within 12 months caused by non-human damage. 

Hi , this is Tracy from ZONHOW , China. Warmly welcome to consult me any you cares, I will try my best provide you satisfied result.

Beam impact tester               Fabric tear strength tester             Baby car tester                               Digital density tester

Wire elongation tester                     Vibration tester                           Melt flow indexer               Universal tensile tester