Product Details

addition cure rtv2 liquid silicone for making mold

1. Description

YJS-620 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room

temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour.

2. Features

*high chemical resistance to the aggressive components of some types of resin

*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)

*High level of accuracy in reproducing very small particulars

*High dimensional stability over time and non-deformability

*Considerable resistance to high temperatures and to ageing

*Excellent non-stick effect

*Soft, stretchy, high tear resistance,

*Will not shrink in service

3. Technical datasheet

Typical general characteristics	Inspection Method	Value
Product data (Catalyzed A+B)	Inspection Method	YJS-620
Hardness	Shore A	20±2
Mix Ratio	A:B	1:1/10:1
Color	/	translucent
Pot life	25 °C (77F)	30-40mins
Curing time	25 °C (77F)	3-4 hours
Mixed viscosity	mPa.s	5000±1000
Tear-strength	kg/cm	20±2
Tensile-strength	M.pa	4.0±1.0
Elongation	%	500±50
Shrinkage	%	≤0.1%

3. Common uses

*Wax

*Urethane (polyurethane)

*Plaster Hydrocal, Hydrostone

*Polyester casting resin

*Low melt metals (mold life can be short)

*Cement, Concrete

*Epoxy

*Soap

*Chocolate

4.SHELF LIFE:

When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months.

5.Package

1 kg/drum; 5 kg/drum; 20 kg/drum;25 kg/drum;200 kg/drum.