Rexroth Plunger Pump Variable Pump A10VSO18DFR1/31R-PPA12N00
USD $550 - $950 /Piece
Min.Order:1 Piece
Fujian Zhenyuan Hydraulic Equipment Co., Ltd.
Rexroth A11VO series A11VO95 A11VO130 A11VO190 A11VO145 A11VO75 A11VO260 Hydraulic Axial Piston
Rexroth A10V series A10VSO18DFR / 31R-VPA12N00 hydraulic piston pump
High pressure Rexroth A4VG140EP4D1/32R-NAF02F021DP for excavator parts hydraulic pump
Excavator SH60 SH75U-1 SH80 Hydraulic Main Pump UCHIDA A10VD43SR1RS5-962-2
Trade assurance Rexroth A10V series A10VO45DFR1/52R-VUC62N00 hydraulic pump
Trade assurance Rexroth A10V series A10VO45DFR1/31R-PSC62K02 hydraulic pump
product manual:
1. Oblique axial piston pump for open loop hydrostatic transmission
2. Flow rate and drive speed and displacement is proportional to the constant drive speed, the infinity can change
3. The control unit is available for each control and adjustment function
4. Work with mineral oil and fire resistant liquids
Structural features:
1. High-performance rotating components and spherical with oil pan, can achieve automatic alignment, low-cycle, high efficiency
2. The drive shaft can withstand radial loads
3.Long life
4. Low noise level
6. New high-performance rotary assembly with proven technical data and a tested spherical oil pan
7. Compact structure
Our product range | Hydraulic pump parts | |
Hydraulic pump | Cylinder block | Press pin |
Piston motor | Piston shoe | Snap ring |
Piston pump | Retainer plate | Coil spring |
Gear pump | Ball guide | Disk spring |
Charge pump | Valve plate | Barrel washer |
Pilot pump | Shoe plate | Oil seal |
Vane pump | Bearing plate | Frication plate |
Repair OEM parts | Swash plate | Steel plate |
Motor spare parts | Drive shaft | Metal |
1. Axial piston pump with swashplate design for hydraulic drive in open circuit
2. Optional installation location
3. Excellent oil absorption characteristics
4. Low noise level
5. Long service life
6. Modular design
7. Short response time
8. Variable speed drive options
9. Visible swing angle indicator
10. The flow rate is proportional to the input transmission speed and displacement. By adjusting the swashplate angle, the output flow can be steplessly adjusted.
11. Use of HF oil in the case of reduced operating data There is a special model that can be used to run with HFC oil
Company Profile
1.ZHENYUAN hydraulic equipment Co.,Ltd has more than 30 years of experiments in manufacturing CNC
machines, and plastic injection moidingmachines.
2.ZHENYUAN company has quiet office enviroment and we have independent R&D ability.
3.ZHENYUAN commpany has efficient production department and strict quality control department to supply good quality products all over the world.