Product Features:

• This series of variable capacity of the leaves of the pump, the oil system for the oil needs of the design, it can improve the efficiency of the loop.
• Reduce the Sao, reduce the oil temperature, so that the input of energy, into an effective work, to achieve the purpose of saving power.
•  For grinding machines, automatic lathes, machine tools, footwear machinery and other special machines or single-machine. 

Low pressure variable vane pump instructions:

• Direction of rotation: clockwise (from the end of the shaft) for the standard, counterclockwise for the special style. The confirmation of the direction of rotation can be checked by the instantaneous starting motor.
•  hydraulic oil: 70bar or less, the use of 40 ℃ viscosity 30-50cSt (ISO VG32) of the hydraulic oil.70bar or more, the use of 40 ℃ viscosity 50-70cSt (ISO VG32) of the hydraulic oil.
• Drain pipe pressure: the drain pipe must be directly connected to the tank under the oil surface, and the configuration of the back pressure should be maintained below 0.3bar.
• Working oil temperature: continuous operation of the temperature of 15-16 ℃.
• Axial fit: The axis error of the shaft and motor shaft is 0.05mm and the angle error is 1 degree.
• Suction pressure: The suction port pressure is -0.3bar to 0.3bar.
• Displacement adjustment: adjust the displacement, the first to adjust the nut, and then adjust the adjustment screw, turn right to reduce the flow, while the left is increased, adjust the screws, please tighten.
• pressure adjustment: turn right to adjust the pressure screw, so that the output pressure is reduced, turn left is increased.
• Maximum peak: The maximum peak value should not exceed 140 bar. A3 type maximum peak shall not exceed 140bar.
• New machine operation: When the new machine starts running, the motor can be restarted without pressure to eliminate the air in the pump and the suction pipe. To ensure the air removal in the system, it can be continuously carried out without load Run for 10 minutes.

Packaging details
Standard export wooden case or as your requirements
Delivery details
1~3 days after payment