Product Description
Taiwan Kompass vane pump VE1-40F-A3 VE1-40F-A1 VE1-40F-A2 VE1-45F-A1 VE1-45F-A2 VE1-45F-A3
Features
1. "Rotary shaft clearance compensation" design, which can automatically adjust the displacement of the pump according to the set pressure.
2. Built-in pressure regulating valve, the system does not need to install a pressure regulating valve.
3, easy to assemble, can directly connect the motor to form a motor-pump combination.
4. Suitable for use on grinding machines, automatic lathes, working machines, shoe-making machines and various other special machines or single-function machines.
Instructions for use
Direction of rotation: Clockwise (as viewed from the end of the plexus axis) is a standard product, and this is the only turning direction. The confirmation of the turning direction can be checked by the instant start motor.
Hydraulic oil: 7 MPa or less, hydraulic oil with a viscosity of 20 to 50 cSt (ISOVG32) at 40 ° C
Drain pipe pressure: The drain pipe must be inserted directly under the oil surface of the fuel tank, and the back pressure generated by the light distribution should be maintained below 0.03MPa.
Working oil temperature: continuous operation temperature is 15 ~ 60 ℃
Shaft centering: The eccentricity error between the pump shaft and the motor is 0.05mm, and the angle error is 1 °
Suction pressure: the pressure at the suction port is -0.03MPa ~ 0.03MPa
Displacement adjustment: When adjusting the displacement, loosen the adjusting nut first, and then turn the adjusting bolt. Turn right to decrease the flow, and turn left to increase. After adjustment, please tighten the nut.
Pressure adjustment: Turn left (counterclockwise) the pressure adjustment bolt to reduce the output pressure, and turn right (clockwise) to increase. After adjustment, please tighten the nut
New machine operation: When the new machine starts running, the motor should be repeatedly started under no pressure to exhaust the air in the pump and the suction pipe. In order to ensure the air in the system is exhausted, it can be continuously operated without load 10 minutes
Our product range | Hydraulic pump parts |
Hydraulic pump parts | Cylinder block | Press pin |
Piston motor | Piston shoe | Snap ring |
Piston pump | Retainer plate | Coil spring |
Gear pump | Ball guide | Disk spring |
Charge pump | Valve plate | Barrel washer |
Pilot pump | Shoe plate | Oil seal |
Vane pump | Bearing plate | Frication plate |
Repair OEM parts | Swash plate | Steel plate |
Motor spare parts | Drive shaft | Metal |
We could supply the rexroth hydraulic pump and motor, also the inner spare parts as below model:
1 A8VO: A8VO55,A8VO80,A8VO107,A8VO160
2,A2FO: A2FO5 A2FO10 A2F12 A2FO16 A2FO23,A2FO28,A2FO32,A2FO45,A2FO56,A2FO63 A2FO80
3,A4VSO: A4VSO40,A4VSO45,A4VSO56,A4VSO71,A4VSO125,A4VSO180,A4VSO250,A4VSO500,
4,A4VG: A4VG28,A4VG45,A4VG50,A4VG56,A4VG71,A4VG125,A4VG180,A4VG250
5,A6V: A6V55,A6V80,A6V107,A6V160,A6V225,A6V250
6,A7V: A7V16,A7V28,A7V55,A7V80,A7V107,A7V160,A7V200,A7V250
7,A8V: A8V55,A8V80,A8V107,A8V115,A8V172
8,A10VSO: A10VSO10,A10VSO18 A10VSO28,A10VSO43,A10VSO45,A10VSO71,A10VSO100,A10VSO140
9,A10VD: A10VD17,A10VD21,A10VD28,A10VD43,A10VD71
10,A11V: A11V50 A11V90 A11V130,A11V145 A11V160,A11V190,A11V250
11,PVV,PV7: PV2.PVV4.PVV5.PVV21.PVV41.PVV42.PVV51.PVV52.PVV54,PV7-1X,PV7-2X
12,PGF,PGH,PGP: GF1-2X,PGF2-2X,PGF3-3X,PGH2-2X,PGH3-2X,PGH4-2X,PGH5-2X,PGP2-2X,PGP3-3X
13 Others: AP2D21,AP2D25,AP2D36,AP2D38Packaging & Shipping
Packaging details
Standard export wooden case or as your requirements
Delivery details
5-10 days after payment
Company Information
Company Information
1.ZHENYUAN hydraulic equipment Co.,Ltd has more than 30years of experiences in manufacturing CNC
machines, and plastic injection moidingmachines.
2.ZHENYUAN company has quiet office enviroment and we have independent R&D ability.
3.ZHENYUAN commpany has efficient production department and strict quality control department to supply good quality products all over the world.
Our Advantages
1.Be of long standing factory built in 1986;
2.usa professional engineer and with 5 utility models and 4 patents;
3.GRH OEM and with 370 professinal employees, 4workshops total 22000 square meters;
4.208 pcs mechanical and test equipments:
5.100% factory testing and inspection personnal in accordance with international standards for the high-frequency sampling,to ensure the quality of products manufactured;
6.Become TEREX,JOHN DEERE,HYDAC,AGCO,EATON,NEW HOLLAND,GARONER DENVER and MAHINDRA supplier.
FAQ
FAQ
Q:What Is Our Main Application?
A:1.Hydraulic system
2.Agriculture machine
3.Construction machina
4.Automobile
5.Local distributors
Q:What Is The Payment Terms?
A:Full order:30% as desposit, the balance before shipment:
Small order /sample ordre: full payment in advance:
Q:Can I Mark My Own Brand On The Pump?
A:Yes. Full order can mark your brand and code.
Q:What Is Our Main Export Market?
A:Europe (41.7%):Italy,Germany,England,France,Holland,Greece,Spain,Portugal,Swissland,Finland,Czekh,Russia,Poland
Asia(40.5%):China,Korea,Singapore,India,Turkey,Iran,Vietnam,Saudi Arabia,Syria,Isreal,Lebanon
Q:How Long Is Guarantee?
A:We give 1 year guarantee.