Professional Sales Glow Wire Combustion Testing Machine
Product Introduction:
Glow wire tester is used for electrician, its components, parts, solid electrical insulation materials or other solid combustible materials, in line with GB/T5169.10~13, IEC60695-2-1/0~2-1/3, GB2099 , VDE 0620, GB4706, UL817 test standards. Test method: Heat to the specified temperature with a standard resistance wire ring, and then make the glow wire in contact with the test sample under test conditions.
Plug-and-socket glow-wire tester is commonly used for electricians and their components, components, and also for solid electrical insulating materials or other solid combustible materials, in line with GB/T5169.10-13, IEC60695-2-1/0 2--1/3 , GB2099, VDE 0620, GB4706, UL817 test standards. Test method: Use a standard resistance wire ring to heat up to the specified temperature, and then make the glow wire and the test sample contact plug and socket rubber and plastic products under the test conditions.
Specification :
Glow wire temperature: adjustable from room temperature to 1000°C;
Temperature thermocouples use nominally Ø0.5mm nickel-chromium and nickel-aluminum (K) armor filament thermocouples;
Glow wire is made of 4mm±0.04mm diameter nickel/chromium (80/20) wire to form a size ring.
Standard size please see the figure below:
l Maintain a pressure of 1N ± 0.2N between the glow wire and the test sample, and limit the press-in depth to 7±0.5mm
l The application time of the glow wire to the sample Ta(T1) is adjustable from 0 to 99 minutes and 99 seconds. Generally according to the standard requirements
l Set for 30 seconds (setting timer "30S00"), and there is a timer for measuring the ignition duration Ti (T2) and the flame extinguishing time Te (T3).
l Dimensions (length x width x height):
l 113cm x 57cm x 120cm(Paint);
l 105 cm x65cm x 135cm(stainless steel);
l Studio volume: 0.5 cubic meters (other sizes can be customized)
l Chassis material: paint / stainless steel
Power supply mode: single phase
Operating voltage: AC 220V / 50Hz
Total power: 500W
working environment:
Temperature: | 5 ~ 40℃; |
Relative temperature: | ≤85% |
Workplace: | Location without violent shaking, impact, vibration and non-corrosive air. |
You May Like
- IEC60695 Glow Wire Test Equipment Electrical Material Flammability Test Machine
- GB/T 2408 Plastics Flammability Tester With Methane Air
- Insulation Material Flame Resistance Tester Horizontal And Vertical Burning Tester
- Wire Burning Test Machine Vertical Horizontal Combustion Testing Machine
- Dongguan Manufacturer Wire Flame Retardant Testing Machine Price
- Electrical Flame Retardant Testing Machine Needle Flame Test Equipment
- Most Popular Flammability Test Machine Needle Flame Burning Test Machine
- High quality Pendulum impact test machine tester with factory price
- Hot Selling High Quality Abrasion Test Machine Tester for Leather Cloth and Paint
- Aisry Hot selling 50 HZ electromagnetic fixed frequency vibration testing machine for Circuit boards
Popular Searches
Find Similar Products By Category
You May Like
- salt fog chamber corrosion tester equipment salt spray test machine used salt spray test chamber price
- Factory Outlets Click Crossed Life Tester High Quality Click Crossed Life Testing Machine
- Factory Outlets High Quality Microcomputer Intelligent Corrugated Board Puncture Strength Tester
- Aisry Hot selling Economic Thermostat tape retention Machine
- Factory outlets 50mm 220v Six Groups Auto Cable and Wire Bending testing machine
- IEC60112 Leakage Tracking Index Tester Leakage Index Test Machine Price
- Most Popular Leakage Current Tester Tracking Index Apparatus
- Flame Retardant Testing Machine For Metal Wire Combustion Testing Machine
- Most Popular Wire Vertical Horizontal Combustion Tester Price
- Gold Supplier Combustion Machine Glow Wire Tester For Electronics
- IEC60695-2-10 Glow Wire Tester For Household Appliances
- AISRY Flame Retardant Testing Machine For Electronic Components Needle Flame Tester
- Laboratory Flame Retardant Tester Needle Flame Tester With Stainless Steel Mirror
- DIN EN60112 Standard Leakage Trace Tester For Insulation Materials
- Stainless Steel Electrical Leakage Flame Retardant Testing Machine Price