Product Application-5 ton Universal Testing Machine for wood tensile compression shear bending test CMT-50

Textile fabric tensile testing machine widely used in footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , ect with different fixtures according to national and international standards customer required.

Textile fabric tensile testing machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.

The implementation of standards and standard configuration

ASTM D5344 : standard test method for extension force of partially oriented Yarn

ASTM D3107-2007(2011) : Standard Test Methods for Stretch Properties of Fabrics                                                    Woven from Stretch Yarns

ASTM D 6614-2000 :  Standrd Test Method for Stretch Propeties of Textile Fabrics-CRE Method  

Main Features-5 ton Universal Testing Machine for wood tensile compression shear bending test CMT-50

1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan)
2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Data transmission: RS232
4. Displacement resolution: 0.001mm
5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.
6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
7. User can set parameters of product material such as length, width, thickness, radius, area and so on.